User Guide

6

© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

Management

Features

±

Remote Management through Web Based GUI

±

System logging and status

±

Account reporting and statistics

±

Web based firmware and configuration updates

Interface

Options

±

RJ-45:

w

10 Base-T: Cat.5 UTP /STP

w

100 Base-TX: Cat.5 UTP /STP

±

Cable Recognition for Straight-through or Crossover Cables

Certifications

FCC Class B, CE, RoHS

Led

±

Per unit: Power

±

Per port: Link/Activity

Power

Consumption

5 Watts Maximum

Power Supply

Internal Switched Power, AC100-240V, 50-60Hz input

Operating

Temperature

32°F to 104°F

(0°C to 40°C)

Operating

Humidity

10% to 95%

(Relative Humidity Non-condensing)

Dimensions

W: 11.6” x D: 7” x H: 1.7”

(W: 294mm x D: 178.8mm x H: 44mm)

Weight

±

Item: 4.5 lbs (2.1Kg)

±

Packaging: 6 lbs (2.7Kg)

1.4 Package Contents

The following items should be included in the box:

±

XBR-2300 Enterprise Dual-WAN Router

±

Power Cord

±

Two L-shaped rack mounting brackets and screws

±

Four rubber pads

±

Quick Installation Guide

±

CD-ROM with User Documentation

If any of the listed items are missing or damaged, please contact the reseller from

whom you purchased for return/replacement.

luxul.com

|

357 South 670 West

|

Suite 160

|

Lindon, UT 84042

|

p: 801-822-5450

|

f: 801-822-5460

User Guide

7

2: HARDWARE DESCRIPTION

2.1 Front Panel

XBR-2300 Front Panel View

±

Factory Reset Button:

Used to restore factory default settings.

w

To reset to factory defaults

, press and hold the reset button until the SYS

LED turns off, approx. 10 seconds. A factory reset may take approximately a

minute to complete. A successful Factory Reset is indicated by all of the Port

LEDs flashing once. When the SYS LED turns on the unit is ready.

NOTE:

To hard reset the router use the power switch. Turn the router

off, wait 5 seconds and turn the unit back on.

CAUTION:

Resetting the XBR-2300 to factory defaults will remove all

custom settings.

2.2 LED Indicators

Indicator

Description

Function

POWER

Power LED

ON indicates the XBR-2300 has power.

SYSTEM

System Status LED

Flashing indicates the XBR-2300 is

functioning correctly.

ON indicates the XBR-2300 is booting.

Off indicates the system is not

functioning correctly.

User Guide

8

© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

Indicator

Description

Function

WAN/LAN

WAN and LAN Status LED

ON indicates the WAN/LAN port is

connected correctly.

Flashing indicates data packets are being

transferred.

100Mbps

WAN and LAN Speed LED

On indicates the corresponding port is in

100Mbps working mode. Off indicates the

corresponding port is in 10Mbps working

mode

±

WAN:

2 WAN RJ-45 Ethernet Ports for connecting up to two independent

internet feeds

±

LAN:

3 LAN RJ-45 Ethernet Ports for connecting to the local network.

NOTE:

It is recommended that a Luxul switch be used in conjunction

with the XBR-2300 to increase number of local ports available.

2.3 Rear Panel

XBR-2300 Rear Panel View

Power Input:

Please use the included power cable

3. PREPARING FOR INSTALLATION

3.1 System Requirements

±

Ethernet Cables

to connect the XBR-2300 to Ethernet enabled devices

±

Computer

supporting TCP/IP and equipped with a Web browser. Supported

Web browser versions include Microsoft IE 6.0 and up, Safari 1.0 and up or

Mozilla Firefox 1.0 and up. The Web browser is used to configure the XBR-2300.

luxul.com

|

357 South 670 West

|

Suite 160

|

Lindon, UT 84042

|

p: 801-822-5450

|

f: 801-822-5460

User Guide

9

±

Power

must be AC 100-240V~ 0.1A 50/60Hz.

3.2 Before Connecting to the Network

The XBR-2300 can be rack-mounted or used as a desktop switch. Before connecting

to the network, please be aware of the following requirements:

±

Install the XBR-2300 in a stable/safe place to avoid any possible damage

±

Make sure there is adequate space around the XBR-2300 for adequate ventila-

tion and proper heat dissipation. It is recommended to have at least 4-6 inches

around all sides.

±

Do not place heavy articles on the XBR-2300.

±

Power outlets should be within 5 feet of the XBR-2300.

±

Verify the ground connection of the outlet is functioning properly.

±

Check the power cord to confirm a secure connection.

±

Avoid placement in direct sunlight.

±

When installing the XBR-2300 on a flat surface, attach the rubber feet to the

bottom of the device to avoid scratching the surface.

4: XBR-2300 INSTALLATION

4.1 Installing the XBR-2300 in a Rack

The XBR-2300 can easily be installed in a standard 19” rack. The XBR-2300 includes two

mounting ears for installing and stabilizing the switch. For attaching the mounting ears

and installing the switch within a rack, please refer to the following illustration:

Rack-Mounting the XBR-2300

±

Using the included screws, attach the mounting ears to each side of the switch,.

±

Mount the switch in the rack with the LEDs facing outwards. Be sure the switch is

level and properly secured within the rack.

User Guide

10

© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

4.2 Desktop Setup

For use as a desktop device, position and apply the included rubber feet to the

bottom of the XBR-2300.

Attaching the Rubber Feet to the XBR-2300

4.3 Connecting Devices

Before installing the XBR-2300, test the Internet connection to validate that it is

functioning properly. When Internet access has been confirmed, follow the steps

below for Router installation.

1.

Establish LAN Connection:

Connect one of the XBR-2300 LAN port to a switch,

access point, or computer

2.

Establish WAN Connection:

Connect the Internet cable to one of the XBR-2300

WAN ports

3.

Connect AC Power:

Connect the included AC power cable to the XBR-2300 first

and then to the AC outlet.

4.4 Default IP Address

The XBR-2300 default IP address is 192.168.0.1. This address can be changed.

However, for hassle free installation of other XenConnect™ plug and play Luxul

devices, it is recommended that the default IP value be maintained.

4.5 Connecting a Client Device

Connect the client device to one of the XBR-2300 LAN ports or to a switch that is

connected to a XBR-2300 LAN port. The DHCP server on the XBR-2300 is config-

ured by default. If your client device is set to obtain an address automatically, no

further configuration is required.