Page 31 / 55 Scroll up to view Page 26 - 30
Chapter 3
Advanced Configuration
27
Wireless-N Home Router
DHCP Clients Table
DHCP Client Table
The DHCP Client Table lists computers and other
devices that have been assigned IP addresses by the
Router. The list can be sorted by IP Address, MAC
Address, Interface, and Client Name. To remove a
DHCP client, click
Delete
. To update the on-screen
information, click
Refresh
. To exit this screen and
return to the
Local Network
screen, click
Close
.
Status > Wireless Network
The
Wireless Network
screen displays information about
your wireless network.
Status > Wireless
Wireless Network
MAC Address
The MAC address of the Router’s local,
wireless interface is displayed.
Mode
The wireless mode used by the network is
displayed.
Network Name (SSID)
The name of the wireless network,
which is also called the SSID, is displayed.
Channel Width
The Channel Width setting (selected on
the
Wireless >
Basic Wireless Settings
screen) is displayed.
Wide Channel
The Wide Channel setting (selected on
the
Wireless > Basic Wireless Settings
screen) is displayed.
Standard
Channel
The
Standard
Channel
setting
(selected on the
Wireless > Basic Wireless Settings
screen)
is displayed.
Security
The wireless security method used by the Router
is displayed.
SSID Broadcast
The status of the SSID Broadcast feature
is displayed.
Page 32 / 55
Appendix A
Troubleshooting
28
Wireless-N Home Router
Appendix A:
Troubleshooting
Your computer cannot connect to the Internet.
Follow these instructions until your computer can connect
to the Internet:
Make sure that the Router is powered on. The Power
LED should be lit and not flashing.
If the Power LED is flashing, then power off all of
your network devices, including the modem, Router,
and computers. Then power on each device in the
following order:
1.
Cable or DSL modem
2.
Router
3.
Computer
Check the cable connections. The computer should
be connected to one of the ports numbered 1-4 on
the Router, and the modem must be connected to the
Internet port on the Router.
The modem does not have an Ethernet port.
The modem is a dial-up modem for traditional dial-up
service. To use the Router, you need a cable/DSL modem
and high-speed Internet connection.
You cannot use the DSL service to connect manually to
the Internet.
After you have installed the Router, it will automatically
connect to your Internet Service Provider (ISP), so you no
longer need to connect manually.
The DSL telephone line does not fit into the Router’s
Internet port.
The Router does not replace your modem. You still need
your DSL modem in order to use the Router. Connect the
telephone line to the DSL modem, and then insert the
setup CD into your computer. Click
Setup
and follow the
on-screen instructions.
When you double-click the web browser, you are
prompted for a username and password. If you want to
get rid of the prompt, follow these instructions.
Launch the web browser and perform the following steps
(these steps are specific to Internet Explorer but are similar
for other browsers):
1. Select
Tools
>
Internet Options
.
2. Click the
Connections
tab.
3. Select
Never dial a connection
.
4. Click
OK
.
The Router does not have a coaxial port for the cable
connection.
The Router does not replace your modem. You still need
your cable modem in order to use the Router. Connect
your cable connection to the cable modem, and then
insert the setup CD into your computer. Click
Setup
and
follow the on-screen instructions.
The computer cannot connect wirelessly to the network.
Make sure the wireless network name or SSID is the same
on both the computer and the Router. If you have enabled
wireless security, then make sure the same security
method and key are used by both the computer and the
Router.
You need to modify the settings on the Router.
Open the web browser (for example, Internet Explorer or
Firefox), and enter the Router’s IP address in the address
field (the default IP address is
192.168.1.1
). When
prompted, enter the password to the Router (the default is
admin
). Click the appropriate tab to change the settings.
WEB:
If your questions are not addressed
here,
refer
to
the
Linksys
website,
www.linksysbycisco.com
Page 33 / 55
Appendix B
Specifications
29
Wireless-N Home Router
Appendix B:
Specifications
Model
WRT120N
Standards
IEEE 802.3u, 802.11g, 802.11b,
Draft 802.11n
LEDs
Power, Internet, Wireless, Wi-Fi
Protected Setup™, Ethernet (1-4)
Ports
Internet, Ethernet (1-4), Power
Buttons
Reset, Wi-Fi Protected Setup™
Cabling Type
Cat 5
# of Antennas
2 (internal)
Detachable (y/n)
No
Modulations
802.11b: CCK/QPSK, BPSK
802.11g: OFDM/BPSK, QPSK,
16-QAM, 64-QAM
802.11n: OFDM/BPSK, QPSK,
16-QAM, 64-QAM
Transmitted Power
in dBm
802.11b: 16.5 ± 1.5 dBm (typical)
802.11g: 13.5 ± 1.5 dBm (typical)
802.11n: 13.5 ± 1.5 dBm (typical)
Receive Sensitivity
in dBm
-94 dBm (typical) @ 1 Mbps
-90 dBm (typical) @ 11 Mbps
-75 dBm (typical) @ 54 Mbps
-66 dBm (typical) @ 270 Mbps
Antenna Gain in dBi
2.0 (max)
UPnP able/cert
Able
Wireless Security
Wi-Fi Protected Access™ 2 (WPA2),
WEP, Wireless MAC Filtering
Security Key Bits
Up to 128-Bit Encryption
OS Requirements
Windows XP, Vista, or Vista 64-Bit
Edition with Latest Updates (for
Network Magic and Setup Wizard)
Mac OS X 10.4 or higher (for
Setup Wizard)
Environmental
Dimensions
7.99" x 1.38" x 6.30"
(203 x 35 x 160 mm)
Unit Weight
8.4 oz (238 g)
Power
12V, 1A
Certifications
FCC, UL/cUL, ICES-003, RSS210, CE,
Wi-Fi (IEEE 802.11b/g), WPA2™,
WMM®, Wi-Fi Protected Setup™
Operating Temp.
0 to 40°C (32 to 104°F)
Storage Temp.
-20 to 60°C (-4 to 140°F)
Operating Humidity
10 to 80%, Noncondensing
Storage Humidity
5 to 90% Noncondensing
Specifications are subject to change without notice.
Page 34 / 55
Appendix C
Warranty Information
30
Wireless-N Home Router
Appendix C:
Warranty Information
Limited Warranty
Linksys warrants this Linksys hardware product against
defects in materials and workmanship under normal
use for the Warranty Period, which begins on the date of
purchase by the original end-user purchaser and lasts for
the period specified below:
One (1) year for new product
Ninety (90) days for refurbished product
Your exclusive remedy and Linksys’ entire liability under
this limited warranty will be for Linksys, at its option, to
(a) repair the product with new or refurbished parts,
(b) replace the product with a reasonably available
equivalent new or refurbished Linksys product, or (c) refund
the purchase price of the product less any rebates. Any
repaired or replacement products will be warranted for
the remainder of the original Warranty Period or thirty (30)
days, whichever is longer. All products and parts that are
replaced become the property of Linksys.
Linksys additionally warrants that any media on which
the software may be provided will be free from defects in
materials and workmanship under normal use for a period
of ninety (90) days from the date of original purchase.
Your exclusive remedy and Linksys’ entire liability under
this limited warranty will be for Linksys, at its option, to
(a) replace the software media, or (b) refund the purchase
price of the software media.
Exclusions and Limitations
This limited warranty does not apply if: (a) the product
assembly seal has been removed or damaged, (b) the
product has been altered or modified, except by Linksys,
(c) the product damage was caused by use with non-
Linksys products, (d) the product has not been installed,
operated, repaired, or maintained in accordance with
instructions supplied by Linksys, (e) the product has
been subjected to abnormal physical or electrical stress,
misuse, negligence, or accident, (f) the serial number on
the Product has been altered, defaced, or removed, or
(g) the product is supplied or licensed for beta, evaluation,
testing or demonstration purposes for which Linksys does
not charge a purchase price or license fee.
EXCEPT FOR THE LIMITED WARRANTY ON MEDIA SET FORTH
ABOVE AND TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, ALL SOFTWARE PROVIDED BY LINKSYS
WITH THE PRODUCT, WHETHER FACTORY LOADED ON THE
PRODUCT OR CONTAINED ON MEDIA ACCOMPANYING
THE PRODUCT, IS PROVIDED “AS IS” WITHOUT WARRANTY
OF ANY KIND. Without limiting the foregoing, Linksys does
not warrant that the operation of the product or software
will be uninterrupted or error free. Also, due to the
continual development of new techniques for intruding
upon and attacking networks, Linksys does not warrant
that the product, software or any equipment, system or
network on which the product or software is used will be
free of vulnerability to intrusion or attack. The product
may include or be bundled with third party software or
service offerings. This limited warranty shall not apply to
such third party software or service offerings. This limited
warranty does not guarantee any continued availability
of a third party’s service for which this product’s use or
operation may require.
TO THE
EXTENT
NOT
PROHIBITED
BY
APPLICABLE
LAW,
ALL
IMPLIED
WARRANTIES
AND
CONDITIONS
OF
MERCHANTABILITY,
SATISFACTORY
QUALITY
OR
FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO
THE DURATION OF THE WARRANTY PERIOD. ALL OTHER
EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS
AND WARRANTIES ARE DISCLAIMED. Some jurisdictions
do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to you. This
limited warranty gives you specific legal rights, and you
may also have other rights which vary by jurisdiction.
TO THE EXTENT NOT PROHIBITED BY APPLICABLE LAW,
IN NO EVENT WILL LINKSYS BE LIABLE FOR ANY LOST
DATA, REVENUE OR PROFIT, OR FOR SPECIAL, INDIRECT,
CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES,
REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING
NEGLIGENCE), ARISING OUT OF OR RELATED TO THE USE
OF OR INABILITY TO USE THE PRODUCT, SOFTWARE OR
ANY SERVICES PROVIDED IN RESPECT OF SUCH PRODUCT
OR SOFTWARE, EVEN IF LINKSYS HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
TO THE EXTENT
NOT PROHIBITED BY APPLICABLE LAW, IN NO EVENT WILL
LINKSYS’ LIABILITY EXCEED THE AMOUNT PAID BY YOU
FOR THE PRODUCT.
The foregoing limitations will apply
even if any warranty or remedy provided under this limited
warranty fails of its essential purpose. Some jurisdictions
do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or
exclusion may not apply to you.
Obtaining Warranty Service
If
you
have
a
question
about
your
product
or
experience
a
problem
with
it,
please
go
to
www.linksysbycisco.com/support
where you will find a
variety of online support tools and information to assist
you with your product. If the product proves defective
during the Warranty Period, contact Linksys Technical
Support for instructions on how to obtain warranty service.
The telephone number for Linksys Technical Support in
your area can be found in the product User Guide and
at
www.linksysbycisco.com
. Have your product serial
number and proof of purchase on hand when calling. A
Page 35 / 55
Appendix C
Warranty Information
31
Wireless-N Home Router
DATED PROOF OF ORIGINAL PURCHASE IS REQUIRED TO
PROCESS WARRANTY CLAIMS. If you are requested to
return your product, you will be given a Return Materials
Authorization (RMA) number. You are responsible for
properly packaging and shipping your product to Linksys
at your cost and risk. You must include the RMA number
and a copy of your dated proof of original purchase when
returning your product. Products received without a RMA
number and dated proof of original purchase will be
rejected. Do not include any other items with the product
you are returning to Linksys. Defective product covered
by this limited warranty will be repaired or replaced and
returned to you without charge. Customers outside of
the United States of America and Canada are responsible
for all shipping and handling charges, custom duties,
VAT and other associated taxes and charges. Repairs or
replacements not covered under this limited warranty will
be subject to charge at Linksys’ then-current rates.
Technical Support
This
limited
warranty
is
neither
a
service
nor
a
support contract.
Information about Linksys’ current
technical
support
offerings
and
policies
(including
any
fees
for
support
services)
can
be
found
at
www.linksysbycisco.com/support
.
This limited warranty is governed by the laws of the
jurisdiction in which the Product was purchased by you.
Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine,
CA 92623.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top