35

Appendix D: Specifications

ADSL2 Modem with USB and Ethernet

Appendix D: Specifications

Standards

G.992.1 (G.dmt), G.992.2 (G.lite), G.992.3 (ADSL2), T1.413i2,

Reach-Extended ADSL (READSL), ADSL2+ Upgradeable (G.992.5),

RFC 1483/2684, RFC 2364 PPPoA, RFC 2516 PPPoE, USB 1.1,

IEEE 802.3, IEEE 802.3u

Buttons

Reset, On/Off

Ports

ADSL:

RJ-11

Ethernet:

10/100 RJ-45 Port

USB:

USB Type B Port

Power

LEDs

Power, Ethernet, USB, DSL, Internet

Dimensions

187 mm x 48 mm x 156 mm

Unit Weight

0,34 kg

Power

External, 5V DC, 1A

Certifications

FCC Part 15B, FCC Part 68, UL, C-UL, CE, IC-03, ICES-03

Operating Temp.

0ºC to 40ºC

Storage Temp.

0ºC to 70ºC

Operating Humidity

10% to 85% Non-Condensing

Storage Humidity

5% to 90% Non-Condensing

36

Appendix E: Warranty Information

ADSL2 Modem with USB and Ethernet

Appendix E: Warranty Information

WARRANTY

Linksys warrants to You that, for a period of two years (the “Warranty Period”), your Linksys Product will be substantially free

of defects in materials and workmanship under normal use.

Your exclusive remedy and Linksys' entire liability under this

warranty will be for Linksys at its option to repair or replace the Product or refund Your purchase price less any rebates.

This

limited warranty extends only to the original purchaser.

If the Product proves defective during the Warranty Period call Linksys Technical Support in order to obtain a Return

Authorization Number, if applicable.

BE SURE TO HAVE YOUR PROOF OF PURCHASE ON HAND WHEN CALLING.

If You are

requested to return the Product, mark the Return Authorization Number clearly on the outside of the package and include a

copy of your original proof of purchase.

RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE.

You

are responsible for shipping defective Products to Linksys.

Linksys pays for UPS Ground shipping from Linksys back to You

only.

Customers located outside of the United States of America and Canada are responsible for all shipping and handling

charges.

ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED

TO THE DURATION OF THE WARRANTY PERIOD.

ALL OTHER EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND

WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED.

Some jurisdictions do not

allow limitations on how long an implied warranty lasts, so the above limitation may not apply to You.

This warranty gives

You specific legal rights, and You may also have other rights which vary by jurisdiction.

This warranty does not apply if the Product (a) has been altered, except by Linksys, (b) has not been installed, operated,

repaired, or maintained in accordance with instructions supplied by Linksys, or (c) has been subjected to abnormal physical

or electrical stress, misuse, negligence, or accident.

In addition, due to the continual development of new techniques for

intruding upon and attacking networks, Linksys does not warrant that the Product will be free of vulnerability to intrusion or

attack.

TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE OR PROFIT,

OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE THEORY OF

LIABILITY (INCLUDING NEGLIGENCE), ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT

(INCLUDING ANY SOFTWARE), EVEN IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

IN NO EVENT

WILL LINKSYS’ LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT.

The foregoing limitations will apply even if

any warranty or remedy provided under this Agreement fails of its essential purpose.

Some jurisdictions do not allow the

exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to You.

This Warranty is valid and may be processed only in the country of purchase.

Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine, CA 92623.

37

Appendix F: Regulatory Information

ADSL2 Modem with USB and Ethernet

Appendix F: Regulatory Information

FCC STATEMENT

This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Connect the equipment to an outlet other than the receiver's

Consult a dealer or an experienced radio/TV technician for assistance

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment

should be installed and operated with minimum distance 20cm between the radiator and your body.

SAFETY NOTICES

Caution: To reduce the risk of fire, use only No.26 AWG or larger telecommunication line

cord.

Do not use this product near water, for example, in a wet basement or near a swimming pool.

Avoid using this product during an electrical storm.

There may be a remote risk of electric shock from lightning.

FCC PART 68 STATEMENT

This equipment complies with Part 68 of the FCC Rules.

A label is attached to the equipment that contains, among other

information, its FCC registration number and ringer equivalence number.

If requested, this information must be provided to

the telephone company.

This equipment uses the following USOC Jack: RJ-11.

An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be

connected to the telephone network or premises wiring using a compatible modular jack, which is FCC Part 68 compliant.

Connection to the telephone network should be made by using the standard modular telephone jack.

38

Appendix F: Regulatory Information

ADSL2 Modem with USB and Ethernet

The REN is useful to determine the quantity of devices that may be connected to the telephone line and still have all of

those devices ring when your telephone number is called.

In most, but not all areas, the sum of RENs should not exceed 5.

To be certain of the number of devices that may be connected to the line, as determined by the total RENs, contact the

telephone company to determine the maximum REN for the calling area.

If this equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily.

If advance notice is not practical, the telephone company will notify the customer as soon as possible.

Also, you will be

advised of your right to file a complaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the

operation of the equipment.

If this happens, the telephone company will provide advance notice in order for you to make

the necessary modifications in order to maintain uninterrupted service.

In the event this equipment should fail to operate properly, disconnect the unit from the telephone line. Try using another

FCC approved device in the same telephone jack.

If the trouble persists, call the telephone company repair service bureau.

If the trouble does not persist and appears to be with this unit, disconnect the unit from the telephone line and discontinue

use of the unit until it is repaired.

Please note that the telephone company may ask that you disconnect the equipment

from the telephone network until the problem has been corrected or until you are sure that the equipment is not

malfunctioning. The user must use the accessories and cables supplied by the manufacturer to get optimum performance

from the product.

No repairs may be done by the customer. If trouble is experienced with this equipment, please contact your authorized

support provider for repair and warranty information.

If the trouble is causing harm to the telephone network, the

telephone company may request you remove the equipment from the network until the problem is resolved.

This

equipment cannot be used on telephone company provided coin service.

Connection to Party Line Service is subject to

state tariffs.

SAFETY NOTICES

Caution: To reduce the risk of fire, use only No.26 AWG or larger telecommunication line

cord.

Do not use this product near water, for example, in a wet basement or near a swimming pool.

Avoid using this product during an electrical storm.

There may be a remote risk of electric shock from lightning.

39

Appendix F: Regulatory Information

ADSL2 Modem with USB and Ethernet

EC DECLARATION OF CONFORMITY (EUROPEAN COMMUNITY)

This product conforms to the Directive 1999/5/EC (R&TTE). The following standards were applied during the assessment of

the product against the requirements of the aforementioned directives:

•

EN 55022: 1997 (Emission)

•

EN 55024: 2003 (Immunity)

•

EN 60950-1: 2001 (Health & Safety)