10

Step3:

The following window allows user to specify the WAN connection type, such as Dynamic IP

Address, Static IP, or PPPoE. After you setup the connection settings, click Next to update the DNS

settings.

Dynamic IP Address:

Automatic access to service provider offer dynamic IP addresses to network.

Static-IP:

If you are using fixed IP Internet connection method, click static-IP to enter the IP

address and gateway address provided by your ISP.

PPPoE:

If you are using PPPoE Internet connection method, click PPPoE to enter the login

information provided by your ISP.

PPTP:

If you are using PPTP Internet connection method, click PPTP to enter the login information

provided by your ISP.

L2TP:

If you are using L2TP Internet connection method, click L2TP to enter the login information

provided by your ISP.

BigPond:

If you are using BigPond Internet connection method, click BigPond to enter the login

information provided by your ISP.(

BigPond is an ISP in Australia)

Step4:

The following window allows user to select the DNS Server.

You can update the DNS settings only if you enabled the DNS server under the WAN configuration

page. After you change the DNS configurations, click Finish to update the DNS settings of the

router.

Click the

Finish

button will be submitted to the router and set down effect.

In the configuration of the status bar, you can view the information about the router. The

router-related information is in the next chapters.

11

3.3

Admin

The Admin window configures the Management of the router basic settings, such as the router’s

Management, System Settings, Firmware Configuration, Tools, Language, Log Settings and

Logout.

3.3.1

Management

Login Account

Set a password if you wish to restrict management access to the Broadband Router.

Remote Management

To manage the Broadband Router from a remote location (outside of the local network), you must

specify the IP address of the remote PC. Leave the IP address as 0.0.0.0, to allow open access to the

router.

12

3.3.2

System Settings

NTP Server:

Set the router to the Internet through the NTP protocol to obtain the correct time and

maintained.

Time Zone:

Select the time zone of the country you are in. The router will set the time based on

your selection.

Daylight Saving:

The router can also take Daylight Saving into account. If you wish to use this

function, you must check/tick the enable box to enable your daylight saving configuration.

Host Name:

Enter a hostname provided by the ISP

NAPT:

Multiple internal addresses mapped to a valid public address, but different protocols and

port numbers corresponding to different internal addresses.

Function Mode:

Default setting is Router.

3.3.3

Firmware Upgrade

User uses the Firmware Upgrade window to locate the new firmware then upgrade the system

firmware. Click "Choose File" button to search for the new firmware location, then click

OK

to

proceed the upgrade.

13

3.3.4

Configuration

Use this window to restore or backup Broadband Router settings, such as Restore Factory Default,

Backup Settings and Restore Settings.

Restore Factory Default:

Reset the settings of this device to the factory default values.

Backup Settings:

Save the settings of this device to a file.

Restore Settings:

Restore the settings of this device to the backup settings.

3.3.5

Tools

Restart Device:

Reboot this device.

14

3.3.6

Language

You can choose English or Traditional Chinese.

3.3.7

Log Settings

The log is very important for network safety, it recorded a variety things of system every day, you

can check the error occurred, or track the Internet traffic.

Remote Log:

Allow remote login View Log.

Log Server:

Type the IP address of Log Server.

Email log:

Check to enable the email log feature.

Send Email:

Click on the "Send" button to send the mail

immediately.

.

Sender Email Address:

Enter the sender email address.

Receiver Email Address

: Enter the receiver email address.

SMTP Server:

Enter outgoing mail server.

Enable Authentication:

Check if need for

authentication.

.

Account Name:

Fill in email user account name.

Password:

Enter password.

Re-type Password:

Re-enter the above password.