Label

Description

Reset to default settings

Select this checkbox to reset router to default settings.

Commit current settings

Select this checkbox to save the current settings and reboot router.

Reboot

Click this button to reboot the router according to the above option.

3.7.3 Password

Click

Login

Password

in the sub-menu to open the screen of Fig 3.7.3. In this page, you can change the

password of the user, include admin and user.

The super user name and password are admin/admin as default, and

the The common user name and password are user/user.

Fig 3.7.3

Label

Description

User Name

Select the user name in the drop-down list box. The choices are

admin

and

user

.

Old Password

After selected the user name, input the old password of the user here.

New Password

Input the new password what you want to set of the user.

Confirmed Password

Input the new password again.

Apply Changes

Click this button to save the settings of this page.

Reset

Click this button to begin configuring the password afresh.

3.7.4 Backup/Restore

Click

Backup/Restore

in the sub-menu to open the screen of Fig 3.7.4. In this page, you can backup the current

settings to a file and restore the settings from the file which was saved previously.

IMPORTANT

! Do not turn off your router or press the Reset button while these procedures are in progress.

41

Fig 3.7.4

Label

Description

Save Settings to File

Click the

Save

button, then select the path and save the configuration file

of your router.

Load Settings from File

Click the

Browse

button to select the configuration file.

Upload

Selected the configuration file of router, click Upload button to begin

restore the router configuration.

3.7.5 Upgrade Fireware

Click

Upgrade Fireware

in the sub-menu to open the screen of Fig 3.7.5. In this page, you can upgrade the

fireware of this router.

IMPORTANT!

Do not turn off your router or press the Reset button while this procedure is in progress.

Fig 3.7.5

Label

Description

Select File

Click the

Browse

button to select the Fireware file.

Upload

Selected the Fireware file, click

Upload

button to begin upgrading the

Fireware.

Reset

Click this button to begin selecting the Fireware file afresh.

42

3.7.6 Time Zone

Click

Time Zone

in the sub-menu to open the screen of Fig 3.7.6. In this page, you can set the system time

manually or get the system time from the time server.

Fig 3.7.6

Label

Description

Refresh

Click this button to refresh the system shown in the page.

Time Mode

If select Time Server, the router will get the system time from the time

server. If select Manual, you should configure the system time manually.

Enable SNTP Client

Update

If select this checkbox, you can choose the correct SNTP Server which

you want.

SNTP Server

Choose the SNTP Server here.

Time Zone

Select the Time Zone of in which area you are.

Apply Changes

Click this button to save the settings of this page.

3.7.7 System Log

Click

System Log

in the sub-menu to open the screen of Fig 3.7.7.

In this page, you can enable or disabled the

System log function, view the system log.

43

Fig 3.7.7

Label

Description

System Log

You can enable or disable the System Log function.

Apply Changes

Click this button to save the settings of this page.

Refresh

Click this button to refresh the system log shown in the textfield.

3.7.8 SNMP

Click

SNMP

in the sub-menu to open the screen of Fig 3.7.8. In this page, you can set the SNMP parameters.

Fig 3.7.8

Label

Description

Trap IP Address

Input the Trap Host’s IP here. The trap information will be sent to this

host.

Community name(read-only)

The network

administrators

must use this password to read the

44

information of this router.

Community name(write-only)

The network

administrators

must use this password to configure

the information of this router.

Apply Changes

Click this button to save the settings of this page.

Reset

Click this button to begin configuring this screen afresh.

3.7.9 TR069

Click

ACL

in the sub-menu to open the screen of Fig 3.7.9. In this page, you can configure the TR-069 CPE.

Fig 3.7.9

3.7.10 ACL

Click

ACL

in the sub-menu to open the screen of Fig 3.7.10.

In this page, you can configure the IP Address

for Access Control List.

If ACL enabled, only the effective IP in ACL can access ADSL

Router

.

Step 1: If you want to enable ACL, please choose "Enable" then press "Apply Changes";

Step 2: Config Access Control List;

Step 3: Press "take effect" to effect the configuration.

Note: If you

check

"Enable" in ACL Capability, please make sure that your host IP is in ACL List before it takes

effect

45