Page 6 / 20 Scroll up to view Page 1 - 5
4
Step 2: Connecting cables
Once connected to a power outlet, the B315 automatically powers on.
Warning:
This equipment may not work when mains power fails.
Power adapter
Computer
USB flash drive
Laptop, tablet, or smart
phone
To prevent interference caused by radio signals, place the B315 at least 1 meter
(3.28 feet) away from telephone and other electrical devices.
Use only the power adaptor supplied by the manufacturer for this device. The
B315's power adapter model is HW-120100XYW. X and Y represent letters or
numbers that vary by region. For details about the specific adapter model, contact
an authorized dealer.
Page 7 / 20
5
Optional: Installing the external antenna
In areas with poor reception, connect external antenna to the B315's external
antenna port to improve signal reception.
1.
Power off the B315 and disconnect it from the power outlet.
2.
Use a small tool, such as a key or a paper clip, to remove the cover from the
antenna ports. Keep the cover in a safe place.
3.
Screw external antenna fully into the antenna port.
4.
Keep external antenna upward to get better signal.
The external antenna is an optional accessory, and may not included in the packaging
box. If required, please contact your local dealer to purchase it.
Before installing the external antenna, ensure that the B315 is powered off and
disconnected from the power outlet.
Only use the external antenna indoors, and do not use it during thunderstorm.
Do not change another unexpected antenna unless manufacturer provide.
Page 8 / 20
6
Scenario 2: Accessing the Internet using Ethernet
Connect the B315 to a wall-mounted Ethernet port or an ADSL modem for Internet
access.
Once connected to a power outlet, the B315 automatically powers on.
Warning:
This equipment may not work when mains power fails.
Power adapter
Computer
USB flash drive
Ethernet port
on the wall
Laptop, tablet,
or smart phone
To prevent interference caused by radio signals, place the B315 at least 1 meter
(3.28 feet) away from telephone and other electrical devices.
Use only the power adaptor supplied by the manufacturer for this device. The
B315's power adapter model is HW-120100XYW. X and Y represent letters or
numbers that vary by region. For details about the specific adapter model, contact
an authorized dealer.
Page 9 / 20
7
3
Setting up a Wi-Fi connection
Step 1: Enabling Wi-Fi on the B315
When the
indicator is steady on, the Wi-Fi function of the B315 is turned on.
Step 2: Recording the SSID and Wi-Fi key
The default SSID and Wi-Fi key are printed on the B315's bottom label.
Step 3: Setting up a Wi-Fi connection on your client
Method 1: Setting up a Wi-Fi connection manually
1.
From your Wi-Fi enabled client, scan for wireless networks in your area.
2.
Connect to the network name that matches the SSID found on the device label.
3.
When prompted for password, enter the Wi-Fi Key found on the device label. (The
Wi-Fi key is case sensitive.) Your client will notify you when it is connected.
Make sure your client (computer, tablet, or smart phone) also supports Wi-Fi.
For details about how to manually enable or disable the Wi-Fi function, refer to the
WLAN settings section of the help information on the web management page.
To prevent unauthorized parties from accessing your Wi-Fi network, it is
recommended that you change the SSID and Wi-Fi key from time to time. For details,
see the help information on the web management page.
Page 10 / 20
8
Method 2: Setting up a Wi-Fi connection through WPS
If the client supports WPS, you can set up a WPS connection as follows:
1.
Ensure that Wi-Fi is enabled on the client.
2.
Press and hold the WPS button for 2 or more seconds. The
indicator then
starts blinking.
3.
Activate the WPS connection on the client in 2 minutes.
For instructions about how to enable a WPS connection on the client, see the client's
user guide.

Rate

4 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top