Huawei B3000 Vodafone Router Manual PDF (Setup & Configuration Guide)

Page 16 / 52 Scroll up to view Page 11 - 15

Online Help

3 Internet

Huawei Proprietary and Confidential

11

The PIN can be changed only when PIN verification is enabled and the PIN is verified.

To change the PIN, perform the following steps:

1.

Choose

Internet

>

PIN Management

.

2.

Set

Pin verification

to

Enable

.

3.

Set

Change PIN

to

Enable

.

4.

Enter the current PIN (4 to 8 digits) in the

box.

5.

Enter a new PIN (4 to 8 digits) in the

New PIN

box.

6.

Repeat the new PIN in the

Confirm PIN

box.

7.

Click

Submit

.

----End

3.3.6 Setting Automatic Verification of the PIN

You can enable or disable automatic verification of the PIN. If automatic verification is

enabled, the CPE automatically verifies the PIN after restarting. This function can be enabled

only when PIN verification is enabled and the PIN is verified.

To enable automatic verification of the PIN, perform the following steps:

1.

Choose

Internet

>

PIN Management

.

2.

Set

Pin verification

to

Enable

.

3.

Set

Remember my PIN

to

Enable

.

4.

Click

Submit

.

----End

3.3.7 Verifying the PUK

If PIN verification is enabled and the PIN fails to be verified for three consecutive times, the

PIN will be locked. In this case, you need to verify the PUK and change the PIN to unlock it.

To verify the PUK, perform the following steps:

1.

Choose

Internet

>

PIN Management

.

2.

Enter the PUK in the

PUK

box.

3.

Enter a new PIN in the

New PIN

box.

4.

Repeat the new PIN in the

Confirm PIN

box.

5.

Click

Submit

.

----End

Page 17 / 52

Online Help

3 Internet

Huawei Proprietary and Confidential

12

3.4 Setting the Internet MTU

A maximum transmission unit (MTU) is defined as the maximum packet size (in bytes) at a

communication protocol layer. It relates to communication ports, for example, network

interface cards and serial ports.

To set the MTU, perform the following steps:

1.

Choose

Internet

>

Internet MTU

.

2.

Set

Internet

MTU

to a value in the range of 1280 to 1500.

3.

Click

Submit

.

----End

3.5 Setting the DNS

This page provide you to set the DNS Sever manually.

To set the DNS, perform the following steps:

1.

Choose

Internet

>

DNS Settings

.

2.

Set

Manual DNS

to

Enable

.

3.

Set DNS

parameters.

4.

Click

Submit

.

----End

Page 18 / 52

Online Help

4 LAN

Huawei Proprietary and Confidential

13

4

LAN

A local area network (LAN) is a shared communication system to which multiple devices are

attached.

When correctly configured, devices on the LAN can use the CPE to share data.

4.1 Setting LAN Host Parameters

By default, the IP address is 192.168.1.1 with a subnet mask of 255.255.255.0. You can

change the host IP address to another individual IP address that is easy to remember. Make

sure that IP address is unique on your network. If you change the IP address of the CPE, you

need to access the web management page with the new IP address.

To change the IP address of the CPE, perform the following steps:

1.

Choose

LAN

>

DHCP Settings

.

2.

In the

LAN Host Settings

area, set

IP address

.

3.

Set the

DHCP server

to

Enable

.

4.

Click

Submit

.

----End

4.2 Configuring the DHCP Server

DHCP enables individual clients to automatically obtain TCP/IP configuration when the

server powers on.

You can configure the CPE as a DHCP server or disable it when the CPE is working in the

routing mode.

When configured as a DHCP server, the CPE automatically provides the TCP/IP configuration

for the LAN clients that support DHCP client capabilities. If DHCP server services are

disabled, you must have another DHCP server on your LAN, or each client must be manually

configured.

To configure DHCP settings, perform the following steps:

1.

Choose

LAN

>

DHCP Settings

.

2.

Set the

DHCP server

to

Enable

.

3.

Set

Start IP address

.

This IP address must be different from the IP address set on the

LAN Host Settings

Page 19 / 52

Online Help

4 LAN

Huawei Proprietary and Confidential

14

area, but they must be on the same network segment.

4.

Set

End

IP address

.

This IP address must be different from the IP address set on the

LAN Host Settings

area, but they must be on the same network segment.

5.

Set

Lease time

.

Lease time

can be set to 1 to 10,080 minutes. It is recommended to retain the

default value.

6.

Click

Submit

.

----End

4.3 Bundled Address List

You can bind an IP address to a device based on its MAC address. The device will receive the

same IP address each time it accesses the DHCP server. For example, you can bind an IP

address to an FTP server on the LAN.

After you change the settings, click

Submit

for the changes to take effect. The

DHCP server may need to restart.

To add an item to the setup list, perform the following steps:

1.

Choose

LAN

>

DHCP Settings

.

2.

Click

Edit List

.

3.

Click

Add

.

4.

Set the MAC address

and

IP Address

.

5.

Click

Submit

.

----End

To modify an item in the setup list, perform the following steps:

1.

Choose

LAN

>

DHCP Settings

.

2.

Click

Edit List

.

3.

Choose the item to be modified, and click

Edit

.

4.

Set the MAC address

and

IP Address

.

5.

Click

Submit

.

----End

To delete an item in the setup list, perform the following steps:

1.

Choose

LAN

>

DHCP Settings

.

Page 20 / 52

Online Help

4 LAN

Huawei Proprietary and Confidential

15

2.

Click

Edit List

.

3.

Choose the item to be deleted, and click

Delete

.

4.

Click

OK

.

----End

To delete all items from the setup list, perform the following steps:

1.

Choose

LAN

>

DHCP Settings

.

2.

Click

Edit List

.

3.

Click

Delete All

.

4.

Click

OK

.

----End

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share