LTE TDD B2268H

User Guide

2 Introducing the Web Configurator

Issue 01 (2014-01-15)

Copyright © Huawei Technologies Co., Ltd.

9

For security reasons, the LTE Device automatically logs you out if you do not use the web configurator

for five minutes (default). If this happens, log in again.

Step 5

The following screen displays if you have not yet changed your password. It is strongly

recommended you change the default password. Enter a new password, retype it to confirm and

click

Apply

; alternatively click

Skip

to proceed to the main menu if you do not want to change

the password now.

Figure 2-2

Change Password Screen

Step 6

The

Connection Status

screen appears.

Figure 2-3

Connection Status (The screenshot uses B2268H as an example.)

Step 7

Click

System Info

to display the

System Info

screen, where you can view the LTE Device's

interface and system information.

----End

2.2 The Web Configurator Layout

Click

Connection Status > System Info

to show the following screen. (See

3.3 The System

Info Screen

for more information.)

LTE TDD B2268H

User Guide

2 Introducing the Web Configurator

Issue 01 (2014-01-15)

Copyright © Huawei Technologies Co., Ltd.

10

Figure 2-4

Web Configurator Layout

As illustrated above, the main screen is divided into these parts:



A

- title bar



B

- main window



C

- navigation panel

2.2.1 Title Bar

The title bar shows the following icon in the upper right corner.

Click this icon to log out of the Web Configurator.

2.2.2 Main Window

The main window displays information and configuration fields. It is discussed in the rest of

this document.

After you click

System Info

on the

Connection Status

screen, the

System Info

screen is

displayed. See

3.3 The System Info Screen

for more information about the

System Info

screen.

If you click

LAN Device

on the

System Info

screen (

A

in

Figure 2-4

), the

Connection Status

screen appears. See

3.2 The Connection Status Screen

for more information about the

Connection Status

screen.

If you click

Virtual Device

on the

System Info

screen (

B

in

Figure 2-4

), a visual graphic

appears, showing the connection status of the LTE Device's ports. The connected ports are in

color and disconnected ports are gray.

LTE TDD B2268H

User Guide

2 Introducing the Web Configurator

Issue 01 (2014-01-15)

Copyright © Huawei Technologies Co., Ltd.

11

Figure 2-5

Virtual Device

2.2.3 Traffic Status

Use the

Maintenance > Traffic Status

screens to look at network traffic status and statistics of

the WAN, LAN interfaces and NAT. See

19 Traffic Status

for more information.

2.2.4 User Account

Use the

Maintenance > User Accounts

screen to configure system password for different user

accounts. See

20 User Account

for more information.

2.2.5 Navigation Panel

Use the menu items on the navigation panel to open screens to configure LTE Device features.

The following table describes each menu item.

Table 2-1

Navigation Panel Summary

LINK

TAB

FUNCTION

Connection Status

NA

This screen shows the network status of the LTE

Device and computers/devices connected to it.

Network Setting

Broadband

Broadband

Use this screen to view or edit an LTE WAN

interface

SIM

Use this screen to enable or disable SIM PIN/PUK

code.

Wireless

General

Use this screen to turn the wireless connection on or

off, specify the SSID(s) and configure the wireless

LAN settings and WLAN authentication/security

settings.

More AP

Use this screen to configure multiple BSSs on the

LTE Device.

WPS

Use this screen to use WPS (Wi-Fi Protected Setup)

to establish a wireless connection.

LTE TDD B2268H

User Guide

2 Introducing the Web Configurator

Issue 01 (2014-01-15)

Copyright © Huawei Technologies Co., Ltd.

12

LINK

TAB

FUNCTION

WMM

Use this screen to enable or disable Wi-Fi

MultiMedia (WMM).

Scheduling

Use this screen to configure when the LTE Device

enables or disables the wireless LAN.

Home Networking

LAN Setup

Use this screen to configure LAN IPv4 TCP/IP

settings, and other advanced properties.

Static DHCP

Use this screen to assign specific IP addresses to

individual MAC addresses.

UPnP

Use this screen to enable the UPnP function.

File Sharing

Use this screen to enable file sharing via the LTE

Device.

Media Server

Use this screen to use the LTE Device as a media

server.

Static Route

Static Route

Use this screen to view and set up static routes for

IPv4 networks on the LTE Device.

NAT

Port

Forwarding

Use this screen to make your local servers visible to

the outside world.

DMZ

Use this screen to configure the IP address of the

LTE Device's DMZ interface.

Sessions

Use this screen to limit the number of NAT sessions

a single client can establish.

ALG

Use this screen to enable or disable the SIP ALG

function which allows SIP calls to pass through

NAT.

Dynamic DNS

Dynamic DNS

Use this screen to allow a static hostname alias for a

dynamic IP address.

Security

Firewall

General

Use this screen to activate/deactivate the firewall for

the IPv4 network.

Services

Use this screen to view and configure services for

the IPv4 network.

Access

Control

Use this screen to view and configure filter rules for

incoming and outgoing traffic.

DoS

Use this screen to activate/deactivate Denial of

Service (DoS) protection.

MAC Filter

MAC Filter

Use this screen to allow specific devices to access

the LTE Device.

Parental Control

Parental

Control

Use this screen to define time periods and days

during which the LTE Device performs parental

LTE TDD B2268H

User Guide

2 Introducing the Web Configurator

Issue 01 (2014-01-15)

Copyright © Huawei Technologies Co., Ltd.

13

LINK

TAB

FUNCTION

control and/ or block web sites with the specific

URL.

VoIP

SIP

SIP Service

Provider

Use this screen to configure your LTE Device's

Voice over IP settings.

SIP Account

Use this screen to set up information about your SIP

account and configure audio settings such as volume

levels for the phones connected to the LTE Device.

Phone

Phone Device

Use this screen you will see which phone(s) will ring

when a specific SIP account number receive an

incoming call; and which SIP account number will

be used when a specific phone is used to make an

outgoing call.

Region

Use this screen to select your location.

Call Rule

Speed Dial

Use this screen to configure speed dial for SIP phone

numbers that you call often.

System Monitor

LTE Status

LTE Status

Use this screen to view detail LTE status

information.

Log

System Log

Use this screen to view the system logs for the

categories that you select.

Phone Log

Use this screen to view the LTE Device's phone

logs.

VoIP Call

History

Use this screen to view the LTE Device's VoIP call

history.

Traffic Status

WAN

Use this screen to view the status of all network

traffic going through the WAN port of the LTE

Device.

LAN

Use this screen to view the status of all network

traffic going through the LAN ports of the LTE

Device.

NAT

Use this screen to view the status of NAT sessions

on the LTE Device.

VoIP Status

VoIP Status

Use this screen to view the SIP, phone, and call

status of the LTE Device.

Maintenance

Users Account

Users Account

Use this screen to configure the passwords your

user accounts.

Remote MGMT

Remote MGMT

Use this screen to enable specific traffic directions

for network services.