19216811.live38
4.9.7
System Log
The section is to view the system log. Click the "Refresh" button to
update the log. Click the "Clear" button to clear all information. The log
will automatically clear once it reaches 150 different entries.
5.
FAQs
This section provides solutions to problems that may occur when
installing and operating the device.
1. Q: I cannot access the device management interface. What should I do?
Make sure the System LED on the device front panel is on.
Make sure all cables are correctly connected and the
corresponding LAN LED on the device is on.
Verify that your PC's TCP/IP settings are configured correctly. If you
select the "Use the following IP address" option, set your PC's IP
address to any IP address between 10.10.10.2 - 10.10.10.254. You
can also select the "Obtain an IP address automatically" option.
Delete your browser cache and cookies or try using a different
browser. Make sure you enter 10.10.10.252 in the address bar.
Press the WPS/RST button for about 7 seconds to restore your
device to factory default settings. Then log into your device
again.