Page 41 / 114 Scroll up to view Page 36 - 40
Version 1.1, 08/2013. Copyright
2013 Hitron Technologies
41
Hitron CGN3 User’s Guide
3.3
The DOCSIS Provisioning Screen
This screen displays the steps successfully taken to connect to the Internet over the
Cable
connection.
Use this screen for troubleshooting purposes to ensure that the CGN3 has
successfully connected to the Internet; if an error has occurred you can identify the
stage at which the failure occurred.
Click
Status
>
DOCSIS Provisioning
. The following screen displays.
Figure 13:
The Status: DOCSIS Provisioning Status Screen
For each step:
Process
displays when the CGN3 is attempting to complete a connection step.
Success
displays when the CGN3 has completed a connection step.
WAN IP
This field displays the CGN3’s IP address on the WAN
(Wide Area Network) interface.
System Time
This displays the current date and time.
Table 11:
The Status: System Information Screen (continued)
Page 42 / 114
Version 1.1, 08/2013. Copyright
2013 Hitron Technologies
42
Hitron CGN3 User’s Guide
3.4
The DOCSIS WAN Screen
Use this screen to discover information about:
The nature of the upstream and downstream connection between the CGN3 and
the device to which it is connected through the
CABLE
interface.
IP details of the CGN3’s WAN connection.
Click
Status
>
DOCSIS WAN
. The following screen displays.
Figure 14:
The Status: DOCSIS WAN Screen
The following table describes the labels in this screen.
Table 12:
The Status: DOCSIS WAN Screen
DOCSIS Overview
CM Configurator file
name
This displays the name of the configuration file that the
CGN3 downloaded from your service provider. This file
provides the CGN3 with the service parameter data that
it needs to perform its functions correctly.
Network Access
This displays whether or not your service provider
allows you to access the Internet over the
CABLE
connection.
Permitted
displays if you can access the Internet.
Denied
displays if you cannot access the Internet.
Page 43 / 114
Version 1.1, 08/2013. Copyright
2013 Hitron Technologies
43
Hitron CGN3 User’s Guide
IP Address
This displays the CGN3’s WAN IP address. This IP
address is automatically assigned to the CGN3
Subnet Mask
This displays the CGN3’s WAN subnet mask.
Gateway IP
This displays the IP address of the device to which the
CGN3 is connected over the
CABLE
interface.
DHCP Lease Time
This displays the time that elapses before your device’s
IP address lease expires, and a new IP address is
assigned to it by the DHCP server.
Downstream Overview
NOTE:
The downstream signal is the signal transmitted to the CGN3.
Port ID
This displays the ID number of the downstream
connection’s port.
Frequency (MHz)
This displays the actual frequency in Megahertz (MHz)
of each downstream data channel to which the CGN3 is
connected.
Modulation
This displays the type of modulation that each
downstream channel uses.
Signal Strength
(dBmV)
This displays the power of the signal of each
downstream data channel to which the CGN3 is
connected, in dBmV (decibels above/below 1 millivolt).
Signal Noise Ratio
(dB)
This displays the Signal to Noise Ratio (SNR) of each
downstream data channel to which the CGN3 is
connected, in dB (decibels).
Channel ID
This displays the ID number of each channel on which
the downstream signal is transmitted.
Upstream Overview
NOTE:
The upstream signal is the signal transmitted from the CGN3.
Port ID
This displays the ID number of the upstream
connection’s port.
Frequency (MHz)
This displays the actual frequency in Megahertz (MHz)
of each upstream data channel to which the CGN3 is
connected.
Modulation
This displays the type of modulation that each upstream
channel uses.
Table 12:
The Status: DOCSIS WAN Screen (continued)
Page 44 / 114
Version 1.1, 08/2013. Copyright
2013 Hitron Technologies
44
Hitron CGN3 User’s Guide
3.5
The DOCSIS Event Screen
Use this screen to discover information about:
The nature of the upstream and downstream connection between the CGN3 and
the device to which it is connected through the
CABLE
interface.
IP details of the CGN3’s WAN connection.
Click
Status
>
DOCSIS Event
. The following screen displays.
Figure 15:
The Status: DOCSIS Event Screen
Signal Strength
(dBmV)
This displays the power of the signal of each upstream
data channel to which the CGN3 is connected, in dBmV
(decibels above/below 1 millivolt).
Signal Noise Ratio
(dB)
This displays the Signal to Noise Ratio (SNR) of each
upstream data channel to which the CGN3 is
connected, in dB (decibels).
Channel ID
This displays the ID number of each channel on which
the upstream signal is transmitted.
Table 12:
The Status: DOCSIS WAN Screen (continued)
Page 45 / 114
Version 1.1, 08/2013. Copyright
2013 Hitron Technologies
45
Hitron CGN3 User’s Guide
The following table describes the labels in this screen.
3.6
The Wireless Screen
Use this screen to view information about the CGN3’s wireless network.
Click
Status
>
Wireless
. The following screen displays.
Table 13:
The Status: DOCSIS Event Screen
No.
This displays the arbitrary, incremental index number
assigned to the DOCSIS event.
Time
This displays the time and date of the DOCSIS event.
Type
This displays the type of the DOCSIS event.
NOTE:
The definitions of the type of DOCSIS event
follow DOCSIS’s specification accordingly.
Priority
This displays the priority of the DOCSIS event.
NOTE:
The definitions of the priority of DOCSIS event
follow DOCSIS’s specification accordingly.
Event
This displays a description of the DOCSIS event.

Rate

3.5 / 5 based on 2 votes.

Popular Hitron Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top