Page 11 / 134 Scroll up to view Page 6 - 10
3
1-2 Safety Information
In order to keep the safety of users and your properties, please follow the
following safety instructions:
1. This Smart Repeater is designed for indoor use only; DO NOT place this
Smart Repeater outdoors
2. DO NOT put this Smart Repeater at or near hot or humid places, like
kitchens or bathrooms. Also, do not leave this Smart Repeater in the car in
summer.
3. DO NOT pull any connected cable with force; disconnect them from the
Smart Repeater first.
4. If you want to place this Smart Repeater in a high location or hang on the
Smart Repeater on a wall, please make sure the Smart Repeater is firmly
secured. Falling from high places will damage the Smart Repeater and its
accessories, and the warranty will be void.
5. Accessories of this Smart Repeater, like antennas and power supply, are a
danger to small children under 3 years old. They may put the small parts in
their nose or mouth and it could cause serious damage to them. KEEP THIS
SMART REPEATER OUT OF THE REACH OF CHILDREN!
6. The Smart Repeater will become hot when being used for extended periods
of time (
This is normal and is not a malfunction).
DO NOT put this Smart
Repeater on paper, cloth, or other flammable materials.
7. There are no user-serviceable parts inside the Smart Repeater. If you have
found that the Smart Repeater is not working properly, please contact technical
support or your dealer of purchase and ask for help. DO NOT disassemble the
Smart Repeater, or warranty will be void.
8. If the Smart Repeater falls into water when it’s powered on, DO NOT use
your hand to pick it up. Switch the electrical power off before you do anything,
or contact an experienced technician for help.
Page 12 / 134
4
9. If you smell something strange, or even see some smoke coming out from
the Smart Repeater or power supply, remove the power supply or switch the
electrical power off immediately, and call dealer of purchase for help.
Page 13 / 134
5
1-3 System Requirements
One computer (Mac or PC)
Internet web browser (Internet Explorer or Firefox recommended)
A wired or wireless networking adapter (e.g. AirPort card, built-in
Ethernet adapter, etc.)
Broadband modem (e.g. Cable or DSL) or wireless Internet connection
(e.g. Hotspot, 802.11b/g network, etc.)
Page 14 / 134
6
1-4 Package Contents
Before you start to use this Smart Repeater, please check if there’s anything
missing in the package, and contact your dealer of purchase to claim for
missing items:
1 x Hi-Gain™ Wireless-N Dual Radio Smart Repeater
1 x Quick Installation Guide
1 x CD with User’s Manual and PC Support Utility
1 x A/C power adapter
3 x 3dBi Hi-Gain Dipole Omni-Directional Antennas
Page 15 / 134
7
1-5 Product Overview
Top Panel
LED Name
(Front Left to
Right)
Light Status
Description
PWR
Stable ON
Smart Repeater is switched on and correctly
powered
Stable OFF
Smart Repeater is off
Slow Blinking
Factory Default Reset (Reset button is held for
greater than 5 seconds)
Fast Blinking
Standard Reset (Reset button is held for less
than 5 seconds)
Wireless
(WAN) Internet
Stable ON
Good Wireless Connection (Signal Strength >
70%)
Stable OFF
Cannot find wireless network to connect to /
not connected
Slow Blinking
Poor Wireless Connection (Signal Strength <
35%)
Fast Blinking
Normal Wireless Connection (Signal Strength
between 36% and 70%)

Rate

4.5 / 5 based on 2 votes.

Popular Hawking Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top