Page 11 / 94
Scroll up to view Page 6 - 10
11
8 PC Network Adapter setup (
Windows XP
)
•
Enter [Start Menu]
°
select [Control panel]
°
select [Network].
•
Select [Local Area Connection]) icon=>select [properties]
Page 12 / 94
12
•
Select [Internet Protocol (TCP/IP)] =>Click [Properties].
•
Select the [General] tab.
a. ESR-9752 supports [DHCP] function, please select both [Obtain an IP
address automatically] and [Obtain DNS server address automatically].
Page 13 / 94
13
9 Bring up ESR-9752
Connect the supplied power-adapter to the power inlet port and connect it to a
wall outlet. Then, ESR-9752 automatically enters the self-test phase. During self-
test phase, Power LED will blink briefly, and then will be lit continuously to
indicate that this product is in normal operation.
10 Smart Wizard
CHECK
•
Internet connection should be setup & ready to use (ADSL or cable modem).
•
Modem must provide an RJ45 port to connect with ESR-9752.
•
Microsoft Windows compatible PC/Notebook with UPnP enabled network
adapter.
•
CAT 5 network cable(s), RJ45 port on PC/Notebook.
STEP 1
Connect
ESR-9752 WAN
port & your
modem LAN
port with RJ45 cable.
STEP 2
Power up
ESR-9752
.POWER led on front panel lights up & remains stable
.
STEP 3
Connect
ESR-9752 LAN
port &
PC/Notebook RJ45
port with network cable.
Page 14 / 94
14
STEP 4
Insert the
ESR-9752
CD into your DVD/CD drive and
SMART WIZARD
should run automatically with a few seconds. If not, please open Windows
Explorer and find the root directory of CD.
Double click on
Wizard.exe
icon to run it.
Click
Setup Wizard
to setup your ESR-9752.
Click
User Manual
to open user manual.
Click
Adobe Reader
to install Adobe Acrobat reader on your PC/Notebook.
Click
EXIT
anytime you want to abort.
19216811.live