Page 31 / 92
Scroll up to view Page 26 - 30
31
Static IP Address
Uses a static IP address. Your service provider
gives a static IP address to access Internet
services.
4.2.1.
PPoE/PPPoA
Parameter
Description
User Name
Enter the username exactly as your ISP assigned.
Password
Enter the password that your ISP has assigned to you.
VPI
Virtual path identifier (VPI) is the virtual path
between two points in an ATM network. Its valid
value is in the range of 0 to 255. Enter the correct VPI
provided by your ISP. By default, VPI is set to 8.
VCI
Virtual channel identifier (VCI) is the virtual channel
Page 32 / 92
32
between two points in an ATM network. Its valid
value is in the range of 32 to 65535 (0 to 31 is
reserved for local management of ATM traffic). Enter
the correct VCI provided by your ISP. By default, VCI is
set to 35.
Connection type
Please check with your ISP the method of
multiplexing. In PPPoE/PPPoA mode, please select
“PPPoE LLC”, “PPPoE VCM
UX
”, “PPPoA LLC”
or
“PPPoA VCM
UX
”.
4.2.2.
Bridge Mode
Parameter
Description
VPI
Virtual path identifier (VPI) is the virtual path
between two points in an ATM network. Its valid
value is in the range of 0 to 255. Enter the correct VPI
provided by your ISP. By default, VPI is set to 8.
Page 33 / 92
33
VCI
Virtual channel identifier (VCI) is the virtual channel
between two points in an ATM network. Its valid
value is in the range of 32 to 65535 (0 to 31 is
reserved for local management of ATM traffic). Enter
the correct VCI provided by your ISP. By default, VCI is
set to 35.
Connection Type
Please check with your ISP the method of
multiplexing. In Bridge Mode, please select
“ADSLTYPE_ROUTER_LLC” or
“ADSLTYPE_ROUTER_VCMUX”.
4.2.3.
Dynamic IP Address
Parameter
Description
VPI
Virtual path identifier (VPI) is the virtual path
between two points in an ATM network. Its
valid value is in the range of 0 to 255. Enter
the correct VPI provided by your ISP. By
Page 34 / 92
34
default, VPI is set to 8.
VCI
Virtual channel identifier (VCI) is the virtual
channel between two points in an ATM
network. Its valid value is in the range of 32 to
65535. (0 to 31 is reserved for local
management of ATM traffic) Enter the correct
VCI provided by your ISP. By default, VCI is set
to 35.
Connection Type
Please check with your ISP the method of
multiplexing. In Bridge Mode, please select
“ADSLTYPE_ROUTER_LLC” or
“ADSLTYPE_ROUTER_VCMUX”.
4.2.4.
Static IP
Parameter
Description
VPI
Virtual path identifier (VPI) is the virtual path
between two points in an ATM network. Its
Page 35 / 92
35
valid value is in the range of 0 to 255. Enter
the correct VPI provided by your ISP. By
default, VPI is set to 8.
VCI
Virtual channel identifier (VCI) is the virtual
channel between two points in an ATM
network. Its valid value is in the range of 32 to
65535. (0 to 31 is reserved for local
management of ATM traffic) Enter the correct
VCI provided by your ISP. By default, VCI is set
to 35.
Static IP Address
Enter the IP Address assigned by your ISP.
IP Subnet Mask
Enter the Subnet Mask assigned by your ISP.
Gateway
Enter the Gateway assigned by your ISP.
Connection Type
Please check with your ISP the method of
multiplexing. In Bridge Mode, please select
“ADSLTYPE_ROUTER_LLC” or
“ADSLTYPE_ROUTER_VCMUX”.
4.3.
Firmware Upgrade
The wizard includes a tool to upgrade
the router’s firmware
. Firmware can
be downloaded from the Edimax website; if you wish to upload new
firmware, select “Firmware Upgrade” from the menu across the top of the
screen.
19216811.live