Page 31 / 97
Scroll up to view Page 26 - 30
26
3.2.3.1 Wireless Basics
In the
Wireless Setup
page, click
Wireless Basics
.
The page
shown in the following figure appears.
In this page, you can
configure the parameters that wireless LAN clients can used to
connect to this device.
Click
Apply
to save the settings.
Page 32 / 97
27
3.2.3.2 Wireless Security
In the
Wireless Setup
page, click
Wireless Security
. The
page shown in the following figure appears. Wireless security
is vital to your network to protect the wireless communication
among wireless stations, access points and wired network.
Click
Apply
to save the settings.
Page 33 / 97
28
3.2.4
Local Network
You can configure the LAN IP address according to actual
requirements. The preset IP address is 192.168.1.1. You can
use the default settings and DHCP service to manage the IP
settings for the private network. The IP address of the device
is the base address used for DHCP. To use the device as
DHCP server on your LAN, the DHCP IP address pool must
be compatible with the IP address of the device. The IP
address available in the DHCP IP address pool changes
automatically if you change the IP address of the device.
You can also enable the secondary LAN IP address. The two
LAN IP addresses must be in different networks.
Choose
Setup
>
Local Network
. The
Local Network
page
shown in the following figure appears.
By default,
Enable DHCP Server
is selected for the Ethernet
LAN interface of the device. DHCP service will assign IP
address to client computer connected to LAN interface. When
the device acts as DHCP server, it will become the gateway of
all computers on intranet. If you change the IP address of the
device, you must also change the range of IP addresses in
Page 34 / 97
29
the pool used for DHCP. The IP address pool can contain up
to 253 IP addresses.
Click
Apply
to save the settings.
In the
Local Network
page, you can assign IP addresses on
the LAN to specific individual computers based on their MAC
addresses.
Click
Add
to add static DHCP addresses (optional). The page
shown in the following figure appears.
Select
Enable
to reserve the IP address for the designated
PC with the specified MAC address.
The
Computer Name
helps you to recognize the PC with the
MAC address. For example: Father’s Laptop.
Click
Apply
to save the settings.
After the DHCP reservation is saved, the DHCP reservations
list displays the configuration.
If the DHCP reservations list table is not empty, you can
select one or more items and click
Edit
or
Delete
.
Page 35 / 97
30
The
NUMBER OF DYNAMIC DHCP CLIENTS
page shows
the current DHCP clients (PC or Laptop) connected to the
device and the detailed information of the connected
computer(s).
3.2.5
Time and Date
Choose
Setup
>
Time and Date
. The page shown in the
following figure appears.
In the
Time and Date
page, you can setup the time of the
internal system clock. You can also set the time zone of the
area of residence and the network time protocol (NTP) server.
You can also configure daylight saving setting by selecting
Automatically synchronize with Internet time servers
.
19216811.live