Page 16 / 97
Scroll up to view Page 11 - 15
11
Step 5
The dialog will instruct you to choose driver from
specific location.
Page 17 / 97
12
3 About the Web Configurator
This chapter describes how to configure the device by the
Web-based configuration utility.
3.1 Access the Device
Follow the following instructions to access the device for the
first time.
Step 1
Open the Internet Explorer (IE) browser and enter
.
Step 2
The
Login
page shown in the following figure
appears. Enter the user name and password.
°
The user name and password of the super user
are
admin
and
1234
.
°
The user name and password of the normal user
are
user
and
user.
Page 18 / 97
13
If you successfully logged in as the super user, the web page
as shown in the following figure appears.
3.2 Setup
3.2.1
Wizard
Wizard
enables fast and accurate configuration of Internet
connection and other important parameters. The following
sections describe these configuration parameters.
When subscribing to a broadband service, you should be
aware of the connection method. Your physical WAN device
can be Ethernet, DSL, or both of them. Technical information
about the properties of your Internet connection is provided
by your Internet service provider (ISP). For example, your ISP
should inform you whether you are connected to the Internet
using a static or dynamic IP address, or the protocol, such as
PPPoA or PPPoE, that you use to communicate over the
Internet.
Page 19 / 97
14
Step 1
Choose
Setup
>
Wizard
. The page shown in the
following figure appears.
Step 2
Click
Setup Wizard
. The page shown in the following
figure appears.
Step 3
There are four steps to configure the device. Click
Next
to continue.
19216811.live