Vigor2920 Series User’s Guide

6

1.3 Hardware Installation

Before starting to configure the router, you have to connect your devices correctly.

1.

Connect the cable Modem/DSL Modem/Media Converter to any WAN port of router

with Ethernet cable (RJ-45).

2.

Connect one end of an Ethernet cable (RJ-45) to one of the

LAN

ports of the router and

the other end of the cable (RJ-45) into the Ethernet port on your computer.

3.

Connect one end of the power adapter to the router’s power port on the rear panel, and

the other side into a wall outlet.

4.

Power on the device by pressing down the power switch on the rear panel.

5.

The system starts to initiate. After completing the system test, the

ACT

LED will light

up and start blinking.

(For the detailed information of LED status, please refer to section 1.1.)

VoIPon

www.voipon.co.uk

[email protected]

Tel: +44 (0)1245 808195

Fax: +44 (0)1245 808299

Vigor2920 Series User’s Guide

7

1.4 Printer Installation

You can install a printer onto the router for sharing printing. All the PCs connected this router

can print documents via the router. The example provided here is made based on Windows

XP/2000. For Windows 98/SE/Vista, please visit

www.DrayTek.com

.

Before using it, please follow the steps below to configure settings for connected computers

(or wireless clients).

1.

Connect the printer with the router through USB/parallel port.

2.

Open

Start->Settings-> Printer and Faxes

.

3.

Open

File->Add Printer

. A welcome dialog will appear. Please click

Next

.

VoIPon

www.voipon.co.uk

[email protected]

Tel: +44 (0)1245 808195

Fax: +44 (0)1245 808299

Vigor2920 Series User’s Guide

8

4.

Click Local printer attached to this computer and click Next.

5.

In this dialog, choose

Create a new port Type of port

and use the drop down list to

select

Standard TCP/IP Port

. Click

Next

.

VoIPon

www.voipon.co.uk

[email protected]

Tel: +44 (0)1245 808195

Fax: +44 (0)1245 808299

Vigor2920 Series User’s Guide

9

6.

In the following dialog, type

192.168.1.1

(router’s LAN IP) in the field of

Printer Name

or IP Address

and type

IP_192.168.1.1

as the port name. Then, click

Next

.

7.

Click Standard and choose Generic Network Card.

8.

Then, in the following dialog, click

Finish

.

VoIPon

www.voipon.co.uk

[email protected]

Tel: +44 (0)1245 808195

Fax: +44 (0)1245 808299

Vigor2920 Series User’s Guide

10

9.

Now, your system will ask you to choose right name of the printer that you installed onto

the router. Such step can make correct driver loaded onto your PC. When you finish the

selection, click

Next

.

10.

For the final stage, you need to go back to

Control Panel-> Printers

and edit the

property of the new printer you have added.

11.

Select "

LPR

" on Protocol, type

p1

(number 1) as Queue Name. Then click

OK

. Next

please refer to the red rectangle for choosing the correct protocol and UPR name.

VoIPon

www.voipon.co.uk

[email protected]

Tel: +44 (0)1245 808195

Fax: +44 (0)1245 808299