Vigor 2820 Series Quick Start Guide

25

6.

On the next page as shown below, please select the appropriate Internet access type

according to the information from your ISP

. For example, you should select

PPPoE mode if the ISP provides you PPPoE interface. Then click

Next

for next step.

PPPoE/PPPoA:

if you click PPPoE or PPPoA as the protocol, please manually enter

the Username/Password provided by your ISP. Then click

Next

.

Vigor 2820 Series Quick Start Guide

26

1483 Bridged IP /1483 Routed IP:

if you choose 1483 Bridged IP / 1483 Routed IP

as the protocol, you will get the following page. Please type in the IP address

information originally provided by your ISP. Then click

Next

for next step.

7.

Now you can see the following screen. It indicates that the setup is complete.

Different types of connection modes will have different summary. Click

Finish

and

then restart the router. Afterward, you will enjoy surfing on the Internet.

Vigor 2820 Series Quick Start Guide

27

3.2 Wireless Configuration

±

For the user of Vigor2820/2820V/2820VS, please skip this section.

For operating Vigor2820n/Vn/VSn well, it is necessary for you to set the wireless LAN

settings for using wireless function. Please read the following section carefully for

configuring the settings for this router.

(The default value of Frequency Domain was set by factory depends on the reselling

region.)

3.2.1 Basic Wireless LAN Concept

In an Infrastructure Mode of wireless network, Vigor wireless router plays a role as an

Access Point (AP)

connecting to lots of wireless clients or Stations (STA). All the STAs

(clients) will share the same Internet connection with other wired hosts via Vigor wireless

router.

Vigor 2820 Series Quick Start Guide

28

3.2.2 General Setup

1.

On the

Wireless LAN

group, select

General Setup

. The following page will be

shown as below.

2.

Check

Enable Wireless LAN

to enable the wireless function.

3.

At present, the router can connect to 11b+11g, 11g Only, 11b Only, 11n Only and

Mixed (11b+11g+11n) stations simultaneously. Simply choose Mix (11b+11g+11n)

mode.

4.

Type in the name of the

SSID

. The default name for SSID is

default

. We suggest

you change it to a particular name for your necessity.

SSID (service set

identifier)

It is used to name the wireless LAN for this router, and it must

have the same content in client PC/notebook wireless card(s).

SSID can be any text numbers or various special characters.

5.

The default channel is 6. You can change it to an appropriate one if the selected

channel is under serious interference.

Vigor 2820 Series Quick Start Guide

29

3.2.3 Security Settings

1.

On the

Wireless LAN

group, select

Security Settings.

2.

Select an appropriate encryption mode to improve the security and privacy of your

wireless data packets.

Disable

Turn off the encryption mechanism. For the security of your

router, please select any one of the encryption mode here.

WEP

Accepts only WEP clients and the encryption key should be

entered in WEP Key.

WEP/802.1x Only

Accepts only WEP clients and the encryption key is

obtained dynamically from RADIUS server with 802.1X

protocol.

WPA/802.1x Only

Accepts only WPA clients and the encryption key is

obtained dynamically from RADIUS server with 802.1X