1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2800G
    5. /
  5. 7
Page 31 / 202 Scroll up to view Page 26 - 30
Vigor2800 Series User’s Guide
25
By checking the checkbox
Join NAT IP Pool
, data from NAT
hosts will be round-robin forwarded on a session basis.
If you do not check
Join NAT IP Pool
, you can still use these
public IP addresses for other purpose, such as DMZ host, Open
Page 32 / 202
Vigor2800 Series User’s Guide
26
Ports.
Default MAC Address
Type in MAC address for the router. You can use
Default MAC
Address
or specify another MAC address for your necessity.
MAC Address – Type in the MAC address for the router manually.
Index (1-15) in
Schedule Setup
You can type in four sets of time schedule for your request. All the
schedules can be set previously in
Application – Schedule
web
page and you can use the number that you have set in that web
page.
After finishing all the settings here, please click
OK
to activate them.
Page 33 / 202
Vigor2800 Series User’s Guide
27
3.1.3 MPoA (RFC1483/2684)
MPoA is a specification that enables ATM services to be integrated with existing LANs,
which use either Ethernet, token-ring or TCP/IP protocols. The goal of MPoA is to allow
different LANs to send packets to each other via an ATM backbone.
To choose
MPoA
as the accessing protocol of the internet, please select
MPoA
from the
Internet Access
menu. The following web page will be shown.
MPoA(RFC1483/2684)
Click
Enable
for activating this function. If you click
Disable
, this
function will be closed and all the settings that you adjusted in this
page will be invalid.
DSL Modem Settings
Set up the DSL parameters required by your ISP. These are vital
for building DSL connection to your ISP.
Multi-PVC channel
- The selections displayed here are
determined by the page of
Internet Access
–
Multi PVCs
.
Select
M-PVCs Channel
means no selection will be chosen.
Encapsulating Type
- Drop down the list to choose the type
provided by ISP.
VPI
- Type in the value provided by ISP.
VCI
- Type in the value provided by ISP.
3G USB Modem Backup
- To use
3G USB Modem as the Internet
backup.
Page 34 / 202
Vigor2800 Series User’s Guide
28
PPP Client Mode -
Click Enable to activate this mode for backup.
SIM PIN code
- Type PIN code of the SIM card that will be used
to access Internet.
Modem Initial String
- Such value is used to initialize USB
modem. Please use the default value. If you have any question,
please contact to your ISP.
Modem Dial String
- Such value is used to dial through USB
mode. Please use the default value. If you have any question,
please contact to your ISP.
PPP Username
- Type the PPP username (optional).
PPP Password
- Type the PPP password (optional).
Index (1-15) -
Set the PCs on LAN to work at certain time interval
only. You may choose up to 4 schedules out of the 15 schedules
pre-defined in
Applications >> Schedule
setup. The default
setting of this filed is blank and the function will always work.
RIP Protocol
Routing Information Protocol is abbreviated as RIP
（
RFC1058
）
specifying how routers exchange routing tables information. Click
Enable RIP
for activating this function.
Bridge Mode
If you choose
Bridged IP
as the protocol, you can check this box
to invoke the function. The router will work as a bridge modem.
WAN IP Network
Settings
This group allows you to obtain an IP address automatically and
allows you type in IP address manually.
Obtain an IP address automatically
– Click this button to obtain
the IP address automatically.
Router Name
– Type in the router name provided by ISP.
Domain Name
– Type in the domain name that you have assigned.
WAN IP Alias
- If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use WAN
IP Alias. You can set up to 8 public IP addresses other than the
current one you are using.
Page 35 / 202
Vigor2800 Series User’s Guide
29
Specify an IP address
– Click this radio button to specify some
data.
IP Address
– Type in the private IP address.
Subnet Mask
– Type in the subnet mask.
Gateway IP Address
– Type in gateway IP address.
Default MAC Address
Type in MAC address for the router. You can use
Default MAC
Address
or specify another MAC address for your necessity.
MAC Address
– Type in the MAC address for the router
manually.
DNS Server IP
Address
Type in the primary IP address for the router. If necessary, type in
secondary IP address for necessity in the future.
After finishing all the settings here, please click
OK
to activate them.

Rate

4.7 / 5 based on 3 votes.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top