Vigor2800 Series User’s Guide

15

User Name

Assign a specific valid user name provided by the ISP.

Password

Assign a valid password provided by the ISP.

Confirm Password

Retype the password.

Always On

Check this box to allow the router connecting to Internet forever.

Idle Timeout

Type in the value (unit is second) as the idle timeout of the

connection. When the time is expired, the internet connection will be

dropped immediately.

Click

Next

for viewing summary of such connection.

Click

Finish.

The online status of this protocol will be shown as below.

Vigor2800 Series User’s Guide

16

2.2.3 Bridged IP

Click

1483 Bridged IP

as the protocol. Type in all the information that your ISP provides

for this protocol.

After finishing the settings in this page, click

Next

to see the following page.

Click

Finish.

The online status of this protocol will be shown as below.

Vigor2800 Series User’s Guide

17

2.2.4 Routed IP

Click

1483 Routed IP

as the protocol. Type in all the information that your ISP provides for

this protocol.

After finishing the settings in this page, click

Next

to see the following page.

Vigor2800 Series User’s Guide

18

Click

Finish.

The online status of this protocol will be shown as below.

2.3 Online Status

The online status shows the system status, WAN status, ADSL Information and other status

related to this router within one page. If you select

PPPoE

or

PPPoA

as the protocol, you

will find out a button of

Dial PPPoE

or

Dial PPPoE

in the Online Status web page.

Online status for PPPoA/PPPoE

Online status for Bridge

Vigor2800 Series User’s Guide

19

Online status for Routed IP

Primary DNS

Displays the assigned IP address of the primary DNS.

Secondary DNS

Displays the assigned IP address of the secondary DNS.

IP Address (in LAN)

Displays the IP address of the LAN interface.

TX Packets

Displays the total transmitted packets at the LAN interface.

RX Packets

Displays the total number of received packets at the LAN interface.

GW IP Addr:

Displays the assigned IP address of the default gateway.

IP Address (in WAN)

Displays the IP address of the WAN interface.

TX Rate

Displays the speed of transmitted packets at the WAN interface.

RX Rate

Displays the speed of received packets at the WAN interface.

Up Time

Displays the total system uptime of the interface.

TX Blocks

Displays the total number of transmitted ATM Blocks.

RX Blocks

Displays the total number of received ATM Blocks.

Corrected Blocks

Displays the total l number of received ATM Blocks corrupted but

corrected.

Uncorrected Blocks

Displays the total number of received ATM Blocks corrupted but

uncorrected.

Mode

Displays the modulation mode used: G.DMT, G.Lite, or T1.413.

State

Displays the DSL line status.

Up Speed

Displays the transmission speed of uploading data (bits/ second).

Down Speed

Displays the transmission speed of downloading data (bits/

second).

SNR Margin

Displays the value of Signal Noise Ratio Margin (dB). The higher

value has better signal quality.

Loop Att.

Displays the value of subscribed Loop Attenuation.