1. Home
    2. /
  2. Manuals
    3. /
  3. DrayTek
    4. /
  4. Vigor-2710
    5. /
  5. 4
Page 16 / 335 Scroll up to view Page 11 - 15
Vigor2710 Series User’s Guide
4
1.2.2 For Vigor2710n
LED
Status
Explanation
Blinking
The router is powered on and running
normally.
ACT
(Activity)
Off
The router is powered off.
On
Wireless access point is ready.
WLAN
Blinking
It will blink while wireless traffic goes
through.
On
The router is ready to access Internet
through DSL link.
DSL
Blinking
Slowly: The modem is ready.
Quickly: The connection is training.
On
The port is connected.
Off
The port is disconnected.
LAN 1/2/3/4
Blinking
The data is transmitting.
On
A USB device is connected and active.
USB
Blinking
The data is transmitting.
VPN
On
The VPN tunnel is active.
QoS
On
The QoS function is active.
On
The DoS/DDoS function is active.
DoS
Blinking
It will blink while detecting an attack.
On
The WPS is on.
Off
The WPS is off.
WPS
Blinking
Waiting for wireless client sending requests
for connection about two minutes.
On
Press this button for 2 seconds to wait for
client device making network connection
through WPS. When the LED lights up, the
WPS will be on.
Off
The WPS is off.
WPS Button
Blinking
Waiting for wireless client sending requests
for connection about 2 minutes.
Interface
Description
WLAN
Press the button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
DSL
Connecter for accessing the Internet through ADSL2/2+.
LAN (1-4)
Connecters for local networked devices.
USB
Connecter for USB storage (Pen Driver Mobile/HD) or
printer.
Page 17 / 335
Vigor2710 Series User’s Guide
5
Interface
Description
Factory Reset
Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the
hole and keep for more than 5 seconds. When you see the ACT LED begins to blink
rapidly than usual, release the button. Then the router will restart with the factory default
configuration.
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.
Page 18 / 335
Vigor2710 Series User’s Guide
6
1.2.3 For Vigor2710Vn
LED
Status
Explanation
Blinking
The router is powered on and running
normally.
ACT
(Activity)
Off
The router is powered off.
On
Wireless access point is ready.
WLAN
Blinking
It will blink while wireless traffic goes
through.
On
The router is ready to access Internet
through DSL link.
DSL
Blinking
Slowly: The modem is ready.
Quickly: The connection is training.
On
The port is connected.
Off
The port is disconnected.
LAN 1/2/3/4
Blinking
The data is transmitting.
On
A USB device is connected and active.
USB
Blinking
The data is transmitting.
On
The phone connected to this port is off-hook.
Off
The phone connected to this port is on-hook.
Phone1/
Phone2
Blinking
A phone call comes.
On
A PSTN phone call comes (in and out).
However, when the phone call is
disconnected, the LED will be off about six
seconds later.
Line
Off
There is no PSTN phone call.
On
The WPS is on.
Off
The WPS is off.
WPS
Blinking
Waiting for wireless client sending requests
for connection about two minutes.
On
Press this button for 2 seconds to wait for
client device making network connection
through WPS. When the LED lights up, the
WPS will be on.
Off
The WPS is off.
WPS Button
Blinking
Waiting for wireless client sending requests
for connection about 2 minutes.
Interface
Description
WLAN
Press the button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
DSL
Connecter for accessing the Internet through ADSL2/2+.
LAN (1-4)
Connecters for local networked devices.
USB
Connecter for USB storage (Pen Driver Mobile/HD) or
printer.
Page 19 / 335
Vigor2710 Series User’s Guide
7
Interface
Description
Line
Connector of analog phone for PSTN life line.
Phone2/Phone1
Connecter of analog phone for VoIP communication
.
Factory Reset
Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the
hole and keep for more than 5 seconds. When you see the ACT LED begins to blink
rapidly than usual, release the button. Then the router will restart with the factory default
configuration.
PWR
Connecter for a power adapter.
ON/OFF
Power Switch.
Page 20 / 335
Vigor2710 Series User’s Guide
8
1.2.4 For Vigor2710VDn
LED
Status
Explanation
Blinking
The router is powered on and running
normally.
ACT
(Activity)
Off
The router is powered off.
On
Wireless access point is ready.
WLAN
Blinking
It will blink while wireless traffic goes
through.
On
The router is ready to access Internet
through DSL link.
DSL
Blinking
Slowly: The modem is ready.
Quickly: The connection is training.
On
The port is connected.
Off
The port is disconnected.
LAN
1/2/3/4
Blinking
The data is transmitting.
On
A USB device is connected and active.
USB
Blinking
The data is transmitting.
On
DECT phone is in use
Off
DECT phone is idle or off.
DECT
Blinking
A DECT phone call comes.
On
The phone connected to this port is
off-hook.
Off
The phone connected to this port is
on-hook.
Phone
Blinking
A phone call comes.
On
A PSTN phone call comes (in and out).
However, when the phone call is
disconnected, the LED will be off about
six seconds later.
Line
Off
There is no PSTN phone call.
On
The WPS is on.
Off
The WPS is off.
WPS
Blinking
Waiting for wireless client sending
requests for connection or DECT
handset about two minutes.
On
DECT Pairing and WPS
:
P
ress and
hold the button for more than 2
seconds then you could try to register
DECT phone with 2710 within 2
minutes.
DECT Paging
: Press once. All handsets
will have beep sound, press the button
again or press any key on any handset
will stop the beep sound.
Off
The WPS is off.
DECT
Pairing/Pag
ing / WPS
Button
Blinking
Waiting for wireless client sending
requests for connection about 2 minutes.

Rate

4 / 5 based on 1 vote.

Popular DrayTek Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top