Vigor2130 Series User’s Guide

23

PPTP/L2TP

if you click PPTP/L2TP as the protocol, please manually enter the Username/Password

provided by your ISP and all the required information.

User Name

Assign a specific valid user name provided by the ISP.

Password

Assign a valid password provided by the ISP.

Server Address

Specify the IP address of the PPTP server.

WAN IP Network Settings

You can choose Static IP or DHCP as WAN IP network setting.

IP Address

Type the IP address if you choose Static IP as the WAN IP

network setting.

Subnet Mask

Type the subnet mask if you chose Static IP as the WAN IP.

Redial Policy

If you want to connect to Internet all the time, you can choose

Always On

. Otherwise, choose

Connect on Demand

.

Idle Time Out

Set the timeout for breaking down the Internet after passing

through the time without any action. The unit is seconds. The

range is XX ~ XX.

MTU Size

It means Max Transmit Unit for packet. The default

setting is 1442.

Enable

The router will detect the MAC address automatically. Or,

check the box to enable MAC address cloning.

Vigor2130 Series User’s Guide

24

Clone MAC Address

It is available when the box of Enable is checked. Click Clone

PC Address. The result will be displayed in the field of MAC

Address.

After finishing the settings here, please click

Next.

2.4.4 Setting up the Wireless Connection

Now, you have to set up the wireless connection. For the user of Vigor2130, please skip this

step.

Enable Wireless LAN

Check the box to enable the wireless function.

SSID Broadcast

Choose

Show

to make the SSID being seen by wireless clients.

Choose

Hide

to prevent from wireless sniffing and make it

harder for unauthorized clients or STAs to join your wireless

LAN.

SSID

It means the identification of the wireless LAN. SSID can be

any text numbers or various special characters. The default

SSID is "DrayTek". We suggest you to change it.

Encryption

Select an appropriate encryption mode to improve the security

and privacy of your wireless data packets.

Each encryption mode will bring out different web page and ask

you to offer additional configuration.

WEP

If you choose WEP as the security configuration, you have to specify encryption key (Key 1 ~

Key 4) and authentication mode (open or shared). All wireless devices must support the same

Vigor2130 Series User’s Guide

25

WEP encryption bit size and have the same key.

Four keys

can be entered here, but only one key can be selected at a time. The keys can be

entered in ASCII or Hexadecimal. Choose the key you wish to use by using the Default Key

drop down list.

Vigor2130 Series User’s Guide

26

WPA-PSK

If you choose WPA-PSK as the security configuration, you have to specify WPA mode,

algorithm and pre-shared key.

Type

The WPA encrypts each frame transmitted from the radio using the key, which either

PSK (Pre-Shared Key) entered manually in this field below or automatically negotiated via

802.1x authentication. Select WPA, WPA2 or Auto as WPA mode.

WPA Algorithm

Choose the WPA algorithm, TKIP, AES or Auto.

WPA Pre-shared Key

The keys can be entered in ASCII or Hexadecimal. Check the

key you wish to use.

Vigor2130 Series User’s Guide

27

WPA- RADIUS

Remote Authentication Dial-In User Service (RADIUS) is a security authentication

client/server protocol that supports authentication, authorization and accounting, which is

widely used by Internet service providers. It is the most common method of authenticating and

authorizing dial-up and tunneled network users.

The built-in RADIUS client feature enables the router to assist the remote dial-in user or a

wireless station and the RADIUS server in performing mutual authentication. It enables

centralized remote access authentication for network management.

If you choose WPA-Radius as the security configuration, you have to specify WPA mode,

algorithm, Radius server, Radius server port and Radius server secret respectively.

Type

The WPA encrypts each frame transmitted from the radio using

the key, which either PSK (Pre-Shared Key) entered manually

in this field below or automatically negotiated via 802.1x

authentication. Select WPA, WPA2 or Auto as WPA mode.

WPA Algorithm

Choose the WPA algorithm, TKIP, AES or Auto.

Server IP Address

Enter the IP address of RADIUS server.

Destination Port

The UDP port number that the RADIUS server is using. The

default value is 1812, based on RFC 2138.

Shared Secret

The RADIUS server and client share a secret that is used to

authenticate the messages sent between them. Both sides must

be configured to use the same shared secret.