Vigor2130 Series User’s Guide

18

2.4 Quick Start Wizard

Notice:

Quick Start Wizard for user mode operation is the same as for admin

mode operation.

If your router can be under an environment with high speed NAT, the configuration provide

here can help you to deploy and use the router quickly. The first screen of

Quick Start

Wizard

is welcome page, please click

Next

.

2.4.1 Setting up the Password

The first screen of

Quick Start Wizard

is entering login password. After typing the password,

please click

Next

.

Vigor2130 Series User’s Guide

19

2.4.2 Setting up the Time Zone

On the next page as shown below, please select the Time Zone for the router installed and

specify the NTP server(s). Then click

Next

for next step.

2.4.3 Setting up the Internet Connection

On the next page as shown below, please select the appropriate connection type according to

the information from your ISP. There are five types offered in this page. Each connection type

will bring out different web page.

Vigor2130 Series User’s Guide

20

Static IP

You will receive a fixed public IP address or a public subnet, namely multiple public IP

addresses from your DSL or Cable ISP service providers. In most cases, a Cable service

provider will offer a fixed public IP, while a DSL service provider will offer a public subnet.

If you have a public subnet, you could assign an IP address or many IP address to the WAN

interface.

IP Address

Type the IP address.

Subnet Mask

Type the subnet mask.

Gateway

Type the gateway IP address.

Primary DNS Server

Type in the primary IP address for the router

Secondary DNS Server

Type in secondary IP address for necessity in the future.

Enable

The router will detect the MAC address automatically. Or,

check the box to enable MAC address cloning.

Clone MAC Address

It is available when the box of Enable is checked. Click Clone

PC Address. The result will be displayed in the field of MAC

Address.

After finishing the settings here, please click

Next.

Vigor2130 Series User’s Guide

21

DHCP

It is not necessary for you to type any IP address manually. Simply choose this type and the

system will obtain the IP address automatically from DHCP server.

Enable

The router will detect the MAC address automatically. Or,

check the box to enable MAC address cloning.

Clone MAC Address

It is available when the box of Enable is checked. Click Clone

PC Address. The result will be displayed in the field of MAC

Address.

After finishing the settings here, please click

Next.

PPPoE

PPPoE stands for

Point-to-Point Protocol over Ethernet

. It relies on two widely accepted

standards: PPP and Ethernet. It connects users through an Ethernet to the Internet with a

common broadband medium, such as a single DSL line, wireless device or cable modem. All

the users over the Ethernet can share a common connection.

PPPoE is used for most of DSL modem users. All local users can share one PPPoE connection

for accessing the Internet. Your service provider will provide you information about user name,

password, and authentication mode.

Vigor2130 Series User’s Guide

22

If your ISP provides you the

PPPoE

connection, please select

PPPoE

for this router. The

following page will be shown:

User Name

Assign a specific valid user name provided by the ISP.

Password

Assign a valid password provided by the ISP.

Redial Policy

If you want to connect to Internet all the time, you can choose

Always On

. Otherwise, choose

Connect on Demand

.

Idle Time Out

Set the timeout for breaking down the Internet after passing

through the time without any action. The unit is seconds. The

range is XX ~ XX.

MTU Size

It means Max Transmit Unit for packet. The default

setting is 1442.

Enable

The router will detect the MAC address automatically. Or,

check the box to enable MAC address cloning.

Clone MAC Address

It is available when the box of Enable is checked. Click Clone

PC Address. The result will be displayed in the field of MAC

Address.

After finishing the settings here, please click

Next.