36

D-Link DAP-1522 User Manual

Section 3 - Configuration

Add Traffic Manager Rule

In Traffic Manager Rule enter settings for each user of your network, using adequate IP (Client IP) or MAC address (Client

MAC). Set appropriate Ethernet to Wireless and Wireless to Ethernet speeds for the traffic you want to regulate.

Enter a name for your new rule.

The IP address assigned to the client.

By assigning MAC addresses to the set of traffic manager rules, specific rules can be defined for individual devices.

Represents the available bandwidth for client data to be forwarded from Ethernet to wireless, the suggested range is 800 ~

96000kbits/sec.

Represents the available bandwidth for client data to be forwarded from wireless to Ethernet, the suggested range is 800 ~

96000kbits/sec.

Note:

Normally the wireless connection transmits application data packets based on the wireless to Ethernet speed and

Ethernet to wireless speed. Users can treat the two speeds as system transmission bandwidth, where all applications will

share the whole system bandwidth based on assigned priorities. Note that the maximum amount of bandwidth that can be

used is the same as the set value of both speeds.

Name:

Client IP

(optional):

Client MAC

(optional) :

Ethernet to

Wireless:

Wireless to

Ethernet:

37

D-Link DAP-1522 User Manual

Section 3 - Configuration

Enter a name for your new schedule.

Select a day, a range of days, or All Week to

include every day.

Check

All Days

or enter a start and end time for

your schedule.

Select

On

or

Off

from the drop-down menu.

Click

Add

to save your schedule. You must click

Save Settings

at the top for your schedules to

go into effect.

The list of schedules will be listed here. Click the

Edit

icon to make changes or click the

Delete

icon to remove the schedule.

Name:

Days:

Time:

Wireless:

Add:

Schedule Rules

List:

Schedule

38

D-Link DAP-1522 User Manual

Section 3 - Configuration

Password:

Verify

Password:

Enter a new password for the Administrator Login

Name. The administrator can make changes to the

settings.

Enter the same password that you entered in the

previous textbox in order to confirm its accuracy.

Tools

Admin

This page will allow you to change the Administrator password. The administrator password has read/write access.

39

D-Link DAP-1522 User Manual

Section 3 - Configuration

Time Zone:

Daylight

Saving:

Date and

Time:

Select the Time Zone from the drop-down menu.

To select Daylight Saving time manually, tick the

Enable Daylight Saving check box.

Next use the

drop-down menu to select a Daylight Saving Offset

and then enter a start date and an end date for

daylight saving time.

To manually input the time, enter the values in these

fields for the Year, Month, Day, Hour, Minute, and

Second and then click Save Settings. You can also

click the

Copy Your Computer’s Time Settings

button at the bottom of the screen.

Time

The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system

clock. From this section you can set the time zone that you are in. Daylight Saving can also be configured to automatically

adjust the time when needed.

40

D-Link DAP-1522 User Manual

Section 3 - Configuration

Save to Local

Hard Drive:

Load from Local

Hard Drive:

Restore to

Factory Default:

Reboot the

Device:

Clear Language

Pack:

Use this option to save the current access point

configuration settings to a file on the hard disk of

the computer you are using. First, click the

Save

button. You will then see a file dialog, where you can

select a location and file name for the settings.

Use this option to load previously saved access

point configuration settings. First, use the Browse

control to find a previously save file of configuration

settings. Then, click the

Load

button to transfer

those settings to the access point.

This option will restore all configuration settings

back to the settings that were in effect at the time

the access point was shipped from the factory.

Any settings that have not been saved will be lost,

including any rules that you have created. If you

want to save the current access point configuration

settings, use the

Save

button above.

Note:

Restoring the factory default settings

will not reset the Wi-Fi Protected Status to Not

Configured.

Click to reboot the access point.

Click to clear the language pack. This will put the

web UI back to English.

System