²1

D-Link DAP-1350 User Manual

Section 3 - Configuration

Wireless

The wireless section allows you to view the wireless clients that are connected to your wireless access point.

Connection Time:

MAC Address:

Displays the amount of time the wireless client has

been connected to the access point.

The Ethernet ID (MAC address) of the wireless

client.

²±

D-Link DAP-1350 User Manual

Section 3 - Configuration

Help

²3

D-Link DAP-1350 User Manual

Section 3 - Configuration

Wireless Client Mode

If you wish to change the default settings or optimize

the performance of the DAP-1350, you may use the

web-based configuration utility.

To access the configuration utility, open a web browser

such as Internet Explorer and enter

dlinkap

or

192.168.0.50

in the address field.

Type

Admin

and then enter your password. Leave the

password blank by default.

If you get a Page Cannot be Displayed error, please

refer to the

Troubleshooting

section for assistance.

Change the mode selector to

CL

on the device. Connect an Ethernet cable from the Ethernet port on the DAP-1350

to a computer for configuration.

²²

D-Link DAP-1350 User Manual

Section 3 - Configuration

This Wizard is designed to assist you in configuring your DAP-1350 as a wireless client.

If you want to change the admin account password,

enter a new password and click

Next

. It is strongly

recommended to change your password.

Wireless Setup Wizard

Enter the Device Name of the AP and click

Next

to

continue. It is recommended to change the Device

Name if there is more than one D-Link device within

the same wireless network.

Click the

Launch Wireless Setup Wizard

button to

use the wizard to setup your network.

²5

D-Link DAP-1350 User Manual

Section 3 - Configuration

For PBC (Push Button Configuration), skip to the

next page.

Select

PIN

to connect your wireless device with WPS.

You may click

Generate New PIN

to use a different

PIN number. Click Connect to start the WPS scan.

Within 2 minutes, enter the PIN number into the other

device you want to connect to.

Select

Auto

as the configuration method only if your

wireless device supports Wi-Fi Protected Setup

(WPS). For

Manual

setup, skip to the next page.

Click

Next

to continue.