DG-BR4015N User Manual

31

Here, you can configure the router using wizard in 2 simple steps.

Step 1 : Configure Internet Connection

Step 2 : Configure Wireless Settings

Click ‘Next’ to continue with the Router Setup Wizard and the following window will

appear to configure Internet connection.

Step1:

Please choose the

Internet connection type

you’re using in this page. There are 4

types of Internet connection, they are:

A. DHCP

B. Static Mode

C. PPPoE (xDSL)

D. 3G

If you’re not sure, please contact your Internet service provider. A wrong Internet

connection type will cause connection problem, and you will not be able to connect to

internet.

If you want to go back to previous step, please press ‘Back’ button at the bottom of this

page. Press ‘Cancel’ to restart the Wizard.

DG-BR4015N User Manual

32

A.

Setup procedure for DHCP

Click on ‘DHCP’ in Internet connection as shown in the below screen.

Click ‘Next’ to continue with the router setup wizard.

B. Setup procedure for Static mode

Click on ‘Static Mode’ in Internet connection and below screen will appear.

DG-BR4015N User Manual

33

Here are descriptions of every setup item:

Parameter

Description

IP address

Please input IP address assigned by your service provider.

Subnet Mask

Please input subnet mask assigned by your service provider

Default Gateway

Please input the default gateway assigned by your service provider.

Primary DNS Server

Please input the IP address of primary DNS server provided by

your service provider.

Secondary DNS

Server

Please input the IP address of secondary DNS server provided by

your service provider.

When you finish with all settings, press ‘

Next

’; if you want to go back to previous menu,

click ‘

Back

’.

C. Setup procedure for PPPoE mode

Click on ‘PPPoE xDSL’ in Internet connection and below given screen will be displayed.

NOTE: You must use the addresses provided by your Internet service

provider, wrong setting value will cause connection problem.

NOTE: You can choose this Internet connection method if your

service provider assigns a fixed IP address (also know as static

address) to you, and not using DHCP or PPPoE protocol. Please

contact your service provider for further information.

DG-BR4015N User Manual

34

Here are descriptions of every setup item:

Parameter

Description

Username

Enter the username provided by ISP

Password

Enter the password provided by ISP

Verify Password

Re-enter password to verify

There are 3 types of Operation Modes:

•

Keep Alive - Internet connection is always alive.

•

On Demand - Only connects to Internet when there’s a connect attempt.

•

Manual - Only connects to Internet when ‘Connect’ button is pressed, and

disconnects when ‘Disconnect’ button is pressed.

Idle Time Out: Specify the time to shutdown internet connection after no internet

activity is detected by specified minutes. This option is only

available when connection type is ‘Connect on Demand’.

D. Setup Procedure for 3G

Please select your STATE, local ISP, and then input the local ISP's APN, PIN, Dial

Number; username, password; click ‘Next’ to continue.

DG-BR4015N User Manual

35

Step2:

Configure Wireless Settings.

Here is the description of every setup item.

Parameter

Description

Network

Name (SSID)

Allows you to change the SSID. Default SSID is DG-BR4015N.

Security

Please secure the wireless network using WEP or WPA/WPA2

security. Default is Disable.

When you finish with all settings, press ‘

Apply

’; if you want to go back to previous

menu, click ‘

Back

’.

You will get message “

Settings successful

” after applying the settings.