DG-BR4000N/E User Manual

41

4-3 Router Status

Choose

Running Status > Router Status

and the Router Status page appears.

DG-BR4000N/E User Manual

42

This page displays the information of the current running status of the device, including

system information, connection status of the Internet port, LAN port, wireless port and

traffic statistics of each port.

Click

Show Statistics

and the

Statistic Information page

as shown in the following

figure appears:

This page displays the performance statistics information of the router, including the

number of sent and received packets at each port. The following table describes parameters

in this page:

Item

Description

System Up Time

Displays the time period that the router is running.

Set Interval

Sets the interval for refreshing this page. Its value range is 1 to

86400 seconds. Enter a value in the field and click Set Interval.

The settings take effect immediately. If you click Stop, this

page displays the statistics information when the page is

refreshed for the last time and it is not refreshed any more.

Click

Connection Status

in the Router Status page, and the Connection Status page

appears.

DG-BR4000N/E User Manual

43

This page displays the information of current connection on the router.

If the WAN connection is set to

PPPoE (Manually Connect)

, the Connection Status page

is as shown in the following figure:

The following table describes buttons in this page:

Item

Description

Connect

Click the button to interrupt the WAN connection.

Disconnect

Click the button to start a new WAN connection.

DG-BR4000N/E User Manual

44

If the WAN connection is set to

DHCP

, the Connection Status page is as shown in the

following figure:

The following table describes buttons in this page:

Item

Description

Release

Click the button to release the IP address.

Renew

Click the button to obtain a new IP address.

If the WAN connection is set to any other mode, you can view the information, but not

perform any settings, in the Connection Status page.

For detailed description of the WAN connection modes, refer to

section

4

-7 WAN

interface settings.

DG-BR4000N/E User Manual

45

4-4 Clients List

Choose

Running Status > Clients List

and the Clients List page appears.

This page displays the information of computers connected to the router, including the IP

adress, device name and MAC address of each computer.

Click Refresh to refresh the information of the connected computers.

4-5 Network Settings

Click

Network Settings

and the extended navigation menu is shown as follows:

The submenu contains

LAN Interface Settings

and

WAN Interface Settings

as seen in

the figure above.