DG-BR4000N/E User Manual

36

After logging in to the Web page, you can view, configure and modify the router settings.

Caution:

If you are managing the wireless router through the Web page, do not cut

off the power supply. Otherwise, the changed settings will not be saved

4-1 Web Configuration

Setup Wizard

You can set the basic network parameters for accessing Internet by following this wizard.

To configure the setup wizard, do as follows:

Step 1

After login, click Setup Wizard in the navigation bar on the left pane of the page.

The Setup Wizard page shown below appears.

If you are familiar with the router settings, you can select

No. I Want To Configure The Router

Myself

. If you want to follow this wizard to configure the router, please select Yes and click

Next

. The router automatically detects the WAN connection mode.

DG-BR4000N/E User Manual

37

Note: If you do not insert the network cable into the WAN interface of the

wireless router, the previous page does not appear.

Step 2

The broadband type can be Dynamic IP (DHCP), Static IP (Fixed) or PPPoE.

1)

If the detected broadband type is Dynamic IP (DHCP), the following figure

appears:

Click

Next

and the following figure appears:

Enter the host name provided by the Internet service provider (ISP) in the Account Name field.

If the ISP does not provide it, you need not modify it.

In this mode, the WAN port of the wireless router obtains the network property information,

including the IP address, subnet mask, gateway and IP address of the DNS server, from the

connected DHCP server.

Next, click Apply and the settings take effect immediately. The setup wizard is now complete.

DG-BR4000N/E User Manual

38

2)

If the detected broadband type is Static IP (Fixed), the following figure

appears:

Click

Next

and the following figure appears:

The following table describes parameters in this page:

Item

Description

IP Address

Enter the IP address of the WAN interface.

IP Subnet Mask

Subnet mask of the WAN IP address. It is usually 255.255.255.0.

Gateway IP Address

Enter the IP address of the gateway if necessary.

Primary DNS

Enter the IP address of the primary DNS server if necessary.

DG-BR4000N/E User Manual

39

Secondary DNS

If the ISP provides another DNS server, enter the IP address of

that DNS server.

After the settings are done, click Apply and the settings will take effect immediately.

The setup wizard is now complete.

3)

If the detected broadband type is PPPoE, the following figure appears:

Click

Next

and the following figure appears:

The following table describes parameters in this page:

Item

Description

Login

Enter the user name provided by the ISP.

Password

Enter the password provided by the ISP.

Service Name

Enter the service name provided by the ISP. If the ISP does

DG-BR4000N/E User Manual

40

not provide it, you need not enter any information.

Domain Name Server

(DNS) Address

Select Use these DNS Servers and enter the IP address

information of the DNS server provided by the ISP. If no

DNS

server

information

is

available,

select

Get

Automatically From ISP.

Primary DNS

Enter the IP address of the primary DNS server if necessary.

Secondary DNS

If the ISP provides another DNS server, enter the IP address

of that DNS server.

Note: The user name and password are case-sensitive. If you have any querries

about the user name and password, contact your ISP.

After the settings are done , click

Apply

and the settings take effect immediately. The setup

wizard is now complete.

4-2 Running Status

Click

Running Status

and the extended navigation menu is shown as follows:

The submenu contains

Router Status

and

Clients List

.