1. Home
    2. /
  2. Manuals
    3. /
  3. Digisol
    4. /
  4. DG-BR4000N
    5. /
  5. 9
Page 41 / 144 Scroll up to view Page 36 - 40
DG-BR4000NG User Manual
41
WAN interface settings must be correctly set, or the Internet connection will fail,
even though settings of PPTP settings are correct. Please contact your Internet
service provider if you don’t know what you should fill in these fields.
Now please go to PPTP settings section:
Parameter
Description
User Name
Please
input
user
ID
(user
name)
assigned
by
your
Internet
service
provider here.
Password
Please input the password assigned by
your Internet service provider here.
PPTP Gateway
Please input the IP address assigned by
your Internet service provider here
Connection ID
Please input the connection ID here, this
is optional and you can leave it blank.
MTU
Please input the MTU value of your
network connection here. If you don’t
know, you can use default value.
BEZEQ-ISRAEL
Setting item ‘BEZEQ-ISRAEL’ is only
required to Enable if you’re using the
service provided by BEZEQ network in
Israel.
Connection type
Please select the connection type of
Internet connection you wish to use.
Refer to Note given in Section 2
-3-3
Setup procedure for ‘PPPoE xDSL’
for
detailed descriptions.
Idle Time Out
Please input the idle time out of Internet
connection you wish to use. Refer to
Note given in Section 2
-3-3 Setup
procedure
for
‘PPPoE
xDSL’
for
detailed descriptions.
When you finish with all settings, please click ‘OK; if you want to go back to
previous menu, click ‘Back’.
Page 42 / 144
DG-BR4000NG User Manual
42
2-3-5 Setup procedure for ‘L2TP xDSL’
:
L2TP is another popular connection method for xDSL and other Internet connection
types, like PPTP, two kinds of
settings are required, we’ll start from ‘WAN
Interface Settings’:
Please select the type of how you obtain IP address from your service provider here.
You can choose ‘Obtain an IP address automatically’ (i.e. DHCP, please refer to
‘Cable Modem’ section 2-3-1), or ‘Use the following IP address’ (i.e. Static IP
address, please refer to Section
2-3-2
).
WAN interface settings must be correctly set, or the Internet connection will fail,
even though L2TP settings are correct. Please contact your Internet service provider
if you don’t know what you should fill in these fields.
Now please go to L2TP settings section:
Page 43 / 144
DG-BR4000NG User Manual
43
Here is the description of every setup item:
Parameter
Description
User Name
Please
input
user
ID
(user
name)
assigned
by
your
Internet
service
provider here.
Password
Please input the password assigned by
your Internet service provider here.
L2TP Gateway
Please input the IP address of L2TP
gateway
assigned
by
your
Internet
service provider here.
MTU
Please input the MTU value of your
network connection here. If you don’t
know, you can use default value.
Connection type
Please select the connection type of
Internet connection you wish to use.
Refer to Note given in Section 2
-3-3
Setup procedure for ‘PPPoE xDSL’
for
detailed descriptions.
Idle Time Out
Please input the idle time out of Internet
connection you wish to use. Refer to
Note given in Section 2
-3-3 Setup
procedure
for
‘PPPoE
xDSL’
for
detailed descriptions.
When you finish with all settings, please click ‘OK; if you want to go back to
previous menu, click ‘Back’.
Page 44 / 144
DG-BR4000NG User Manual
44
2-3-6 Procedure for Saving the Settings
After completion of all the settings you need to save it.
Click ‘OK’ and the following message will be displayed on your web browser:
Click ‘Apply’ button to prepare to restart the router, and you’ll see this message:
Wait for about 30 seconds, then click ‘OK!’ button. You’ll be back to router
management interface again, and the router is ready with new settings.
2-4 General Setup
In this chapter, you’ll know how to change the time zone, password, and remote
management settings. Please start your web browser and log onto router web
management interface, then click ‘General Setup’ button on the left, or click
‘General Setup’ link at the upper-right corner of web management interface.
HERE
Page 45 / 144
DG-BR4000NG User Manual
45
2-4-1 Time zone and time auto-synchronization
Please follow the instructions mentioned below to set time zone and time auto-
synchronization parameters.
Please click ‘System’ menu on the left of web management interface, then click
‘Time Zone’, and the following screen will be displayed on your web browser. For
setting of the Time Zone, Time Server Address and Daylight Savings parameters in
this screen, please refer
section ‘2-3 Using Quick Setup’
When
you finish, click ‘Apply’. You’ll see the following message displayed on web
browser:
Press ‘Continue’ to save the settings made and go back to web management
interface; press ‘Apply’ to save the settings made and restart the router so the
settings will take effect after it reboots.

Rate

4 / 5 based on 3 votes.

Popular Digisol Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top