1. Home
    2. /
  2. Manuals
    3. /
  3. Digisol
    4. /
  4. DG-BR4000N
    5. /
  5. 3
Page 11 / 144 Scroll up to view Page 6 - 10
DG-BR4000NG User Manual
11
7.
There’s no user-serviceable part inside the router. If you find that the router is not
working properly, please contact your dealer of purchase and ask for help. DO
NOT disassemble the router, warranty will be void.
8.
If the router falls into water when it’s powered, DO NOT use your hands to pick it
up. Switch the electrical power off before you do anything, or contact an
experienced electrical technician for help.
9.
If you smell something strange, or even see some smoke coming out from the
router or power supply, remove the power supply or switch the electrical power
off immediately, and call dealer of purchase for help.
1-3 System Requirements
Notebook or desktop computer with network adapter (wired/wireless)
Internet connection, provided by xDSL or cable modem with a RJ-45
Ethernet port.
Web browser (
Microsoft Internet Explorer 4.0 or above, Netscape Navigator
4.7 or above, Opera web browser, or Safari web browser
).
An available AC power socket (100 – 240V, 50/60Hz)
1-4 Package Contents
Before you start using this router, please check if there’s anything missing in the
package, and contact your dealer of purchase to claim for missing items:
DG-BR4000NG Wireless Broadband Router
Switching power adapter (5V DC, 1A)
Rubber feet (4 Nos.)
Quick Installation Guide
Installation Guide CD (includes User Manual, Utility & Firmware)
Patch chord (1 No.)
Page 12 / 144
DG-BR4000NG User Manual
12
1-5 Get familiar with your new wireless broadband router
Front Panel
LED Name
LED Color
Light Status
Description
P (Power)
Green
On
Router is switched on and correctly powered.
On
Wireless WPS function is enabled.
Off
Wireless network is switched off.
WLAN
Amber
Flashing
Wireless LAN activity (transferring or receiving
data).
On
WAN port is connected.
Off
WAN port is not connected.
WAN
Green
Flashing
WAN activity (transferring or receiving data).
On
LAN port is connected.
Off
LAN port is not connected.
LAN (1~4)
Green
Flashing
LAN activity (transferring or receiving data).
Page 13 / 144
DG-BR4000NG User Manual
13
Back Panel
Interfaces
Description
Antenna
It is a 3dBi dipole antenna.
Radio ON/OFF
Switch the button to activate or deactivate the wireless functions.
After switching the button, the router will be reset automatically
for enabling the new setting.
Reset / WPS
Reset the router to factory default settings (clear all settings) or
start WPS function. Press this button and hold for 10 seconds to
restore all settings to factory defaults, and press this button for less
than 5 seconds to start WPS function.
LAN (1 – 4)
Local Area Network (LAN) ports 1 to 4.
WAN
Wide Area Network (WAN / Internet) port.
Power
Power connector, connects to A/C power adapter.
Page 14 / 144
DG-BR4000NG User Manual
14
2. System and Network Setup
2-1 Hardware and Software Installation
Hardware Installation:-
Please follow the below mentioned instructions to build the network connection
between your new WIRELESS router and your computers, network devices:
1.
Connect your xDSL / cable modem to the WAN port of the router by an Ethernet
cable.
Page 15 / 144
DG-BR4000NG User Manual
15
2.
Connect all your computers, network devices (switch / hub) to the LAN port of
the router.
3.
Connect the power adapter (5V DC / 1A) to the wall socket, and then connect it
to the ‘Power’ socket of the router.
4.
Please check all LEDs on the front panel. Power LED ‘P’ should be steadily ON,
WAN and LAN LEDs should be ON. Check if the computer / network device
connected to the respective port of the router is powered ON and correctly
connected. If power LED ‘P’ is not ON, or any LED you expected is not ON,
please recheck the cabling, or jump to
‘4-2 Troubleshooting’
for possible
reasons and solution.

Rate

4 / 5 based on 3 votes.

Popular Digisol Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top