CRADLEPOINT

MBR95 | USER MANUAL Firmware ver. 3.6.3

© 2011

CRADLEPOINT, INC.

PLEASE VISIT

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 4

CradlePoint routers are built to work with most popular 4G/3G USB Modems from: AT&T, Bell Canada, Clearwire,

Cricket, Rogers, Sprint, T-Mobile, Telus, US Cellular, Verizon Wireless, & Virgin Mobile, as well as most Cable,

DSL, and Satellite providers.

ENHANCED WIFI



600+ feet of WiFi Range



Wireless “N” WiFi (802.11n, legacy 802.11b/g, 2x2 MIMO Internal Antenna system)



Enhanced performance around walls and other obstructions



Maximum security with both Private and Guest networks

ADDITIONAL FEATURES



2x2 MIMO Internal Antenna Subsystem, dual SSIDs



Plug-and-Play support for over 120 broadband data modems including LTE, WiMAX and HSPA+, allowing for

maximum flexibility



Simple to install, configure and maintain

CRADLEPOINT

MBR95 | USER MANUAL Firmware ver. 3.6.3

© 2011

CRADLEPOINT, INC.

PLEASE VISIT

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 5

2 HARDWARE OVERVIEW

CRADLEPOINT

MBR95 | USER MANUAL Firmware ver. 3.6.3

© 2011

CRADLEPOINT, INC.

PLEASE VISIT

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 6

2.1

Ports, Buttons, and Switches

CRADLEPOINT

MBR95 | USER MANUAL Firmware ver. 3.6.3

© 2011

CRADLEPOINT, INC.

PLEASE VISIT

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 7

2.2

LEDs

Power:

The MBR95 must be powered using an approved 12V DC power source.

CRADLEPOINT

MBR95 | USER MANUAL Firmware ver. 3.6.3

© 2011

CRADLEPOINT, INC.

PLEASE VISIT

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

FOR MORE HELP AND RESOURCES

PAGE 8



Green = Powered on.



No Light = Not receiving power. Check that the unit is connected to an outlet.



Amber = Attention. Check router status page.

Active Ethernet Port Connections

–

1-4 LAN

:

Indicates a connected device on the 1-4 LAN ports on the MBR95.



Blue = Connected to an active 10/100 Ethernet interface.



Blinking Blue = Traffic.



No Light = Not connected, the connection is not configured correctly, the router is not configured correctly, or the

router may not be turned on.

WPS:

WiFi Protected Setup. When you press the WPS button for five seconds, it allows you to use WPS for your WiFi

security.



Blinking Blue = WPS setting is in progress.



Solid Blue = WPS is active.

Wireless Broadcast:

Indicates activity on the WiFi broadcast for the 2.4 GHz band.



Blue = 2.4 GHz WiFi is on and operating normally.



Red = Error with 2.4 GHz connection.



No Light = WiFi is off.

Cable, DSL, or Satellite Modem

–

WAN

:

Indicates information about a data source connected to the WAN Ethernet port

(blue port).



Blue = Connected to an active 10/100 Ethernet interface.



Blinking Blue = Traffic.



No Light = Not connected, the connection is not configured correctly, or the switch or router are not configured

correctly or turned on.