Page 26 / 150 Scroll up to view Page 21 - 25
Viewing CVR100W Status
Viewing the Dashboard
Cisco CVR100W Wireless-N VPN Router Administration Guide
24
2
CPU
Current CPU utilization.
Memory
Current memory utilization.
Current Time
Time of day.
System Up Time
Duration for which the system has been running.
Do-Not-Disturb Mode
Shows if the Do-Not-Disturb mode is enabled or
disabled.
Syslog Summary
Indicates whether logging is enabled for these event categories:
Emergency
Alert
Critical
Error
Warning
To view complete logs, click
details
. See
Viewing Logs
for more information.
To configure the logging settings, click
manage logging
. See
Configuring
Logging
for more information.
LAN (Local Network) Interface
To view complete LAN settings, click
details
. See
Configuring LAN Settings
for more information.
MAC Address
MAC address of the CVR100W.
IPv4 Address
Local IPv4 address of the CVR100W.
IPv6 Address
Local IPv6 address of the CVR100W (if IPv6 is
enabled).
DHCP Server
Shows if the DHCP server is enabled or disabled.
DHCPv6 Server
Shows if the DHCPv6 server is enabled or disabled (if
IPv6 is enabled).
Page 27 / 150
Viewing CVR100W Status
Viewing System Summary
Cisco CVR100W Wireless-N VPN Router Administration Guide
25
2
Viewing System Summary
The System Summary page displays a summary of the CVR100W’s settings.
To view a summary of system settings:
STEP 1
Choose
Status
>
System Summary
.
STEP
2
From the
Refresh Rate
drop-down menu, choose a refresh rate.
WAN (Internet) Information
To view complete WAN settings, click
details
. See
Configuring WAN Settings
for more information.
MAC Address
MAC address of the WAN port.
IPv4 Address
IPv4 address of the WAN port.
IPv6 Address
IPv6 address of the WAN port (if IPv6 is enabled).
State
Shows if the WAN port is active or inactive for routing.
If the WAN port is active for routing, the WAN state
shows “Up.” If the WAN port is inactive for routing, the
WAN state shows “Down.”
NOTE
The state “Down” means that the network
detection fails.
Wireless
Displays the status of all four predefined SSIDs. To view complete wireless
settings, click
details
. See
Viewing Wireless Statistics
for more information.
Signal Strength
Shows if the Wi-Fi signal strength is 100%, 50%, or
off.
cisco-xxxx
Shows if the predefined SSID is enabled or disabled.
VPN
QuickVPN Users
Number of QuickVPN users.
Page 28 / 150
Viewing CVR100W Status
Viewing System Summary
Cisco CVR100W Wireless-N VPN Router Administration Guide
26
2
The System Summary page displays the following information:
System Information
Firmware Version
Firmware version that the CVR100W is currently
using.
Firmware MD5
Checksum
Message-Digest algorithm used to verify the integrity
of files.
System Up Time
Duration for which the system has been running.
Current Time
Time of day.
PID VID
Product ID and version ID of the CVR100W.
IPv4 Configuration
LAN IP
LAN address of the CVR100W.
WAN IP
WAN address of the CVR100W.
When the WAN port is configured to obtain an IP
address from your ISP using Dynamic Host
Configuration Protocol (DHCP), you can click
Release
to release its IP address, or click
Renew
to obtain a
new IP address.
Gateway
IP address of default network gateway.
Mode
Displays
Gateway
if NAT is enabled, or
Router
.
DNS 1
Primary DNS server IP address of the WAN port.
DNS 2
Secondary DNS server IP address of the WAN port.
DNS 3
Third DNS server IP address of the WAN port.
DDNS
Shows if the Dynamic DNS (DDNS) is enabled or
disabled.
IPv6 Configuration (if IPv6 address mode is enabled)
LAN IP
LAN address of the CVR100W.
WAN IP
WAN address of the CVR100W.
Gateway
IP address of default network gateway.
Page 29 / 150
Viewing CVR100W Status
Viewing Connected Devices
Cisco CVR100W Wireless-N VPN Router Administration Guide
27
2
Viewing Connected Devices
The Connected Devices page displays information about the active devices
connected to the CVR100W.
NOTE
The Connected Devices page displays information from devices that have
responded to the CVR100W’s Address Resolution Protocol (ARP) request. If a
device does not respond to the request, it is removed from the list.
To view connected devices:
STEP 1
Choose
Status
>
Connected Devices
.
STEP
2
To specify the types of interfaces to display, choose an option from the
View
according to interface type
drop-down menu. You can choose one of the
following options:
DNS 1
IP address of the primary DNS server.
Wireless Summary
SSIDx
Name of the wireless network.
Security
Security setting for the wireless network.
Firewall Setting Status
DoS (Denial of Service)
Shows if DoS protection is on or off.
Block WAN Request
Shows if WAN request blocking is on or off.
Remote Management
Shows if remote management is on or off.
VPN Setting Status
Available QuickVPN
Connections
Number of available QuickVPN connections.
Connected QuickVPN
Users
Number of connected QuickVPN users.
Page 30 / 150
Viewing CVR100W Status
Viewing DHCP Leased Clients
Cisco CVR100W Wireless-N VPN Router Administration Guide
28
2
The
ARP
table
displays the following information:
Viewing DHCP Leased Clients
To view information for the DHCP clients:
STEP 1
Choose
Status
>
DHCP Leased Clients
.
For every VLAN defined on the CVR100W, this page displays a list of the clients
associated with the VLAN.
All
Displays a list of all devices connected to the
CVR100W.
Wireless
Displays a list of all wireless devices connected to the
CVR100W.
Wired
Displays a list of all devices connected through the
Ethernet ports on the CVR100W.
WDS
Displays a list of all Wireless Distribution System
(WDS) devices connected to the CVR100W.
Name
Name of the device connected to the CVR100W.
IP Address
IP address of the connected device.
MAC Address
MAC address of the connected device.
Type
Connection type of the connected device.
Static DHCP
Shows if Static DHCP is enabled or disabled on the
connected device.
Interface Type
Device interface type, such as Wired, WDS, and so on.
Host Name
Name of the device connected to the CVR100W.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top