Page 6 / 20 Scroll up to view Page 1 - 5
ONT G-25E Hardware Installation Manual
Table of Contents
About This Document
_________________________________________________________ VI
Purpose
___________________________________________________________________________ VI
Intended Audience
_________________________________________________________________ VI
Chapter Overview
__________________________________________________________________ VI
1.
Product Description
_________________________________________________________ 1
1.1
Introduction
__________________________________________________________________ 1
1.2
Services
______________________________________________________________________ 1
1.3
Features
______________________________________________________________________ 1
1.4
Specifications
_________________________________________________________________ 2
2.
Safety
_____________________________________________________________________ 4
2.1
Electrical Safety
_______________________________________________________________ 4
2.2
Laser Safety
___________________________________________________________________ 5
3.
Installation
________________________________________________________________ 6
3.1
Site Preparation
_______________________________________________________________ 6
3.1.1
Environmental Requirements
__________________________________________________________6
3.1.2
Power Requirements
_________________________________________________________________6
3.2
Connecting to Network
_________________________________________________________ 6
3.3
Connecting Power
_____________________________________________________________ 7
3.4
Connecting Telephone (POTS) Service
____________________________________________ 8
3.5
Connecting Ethernet Service
_____________________________________________________ 8
3.6
Verify the Installation
___________________________________________________________ 9
3.6.1
Verifying ONT Status
_________________________________________________________________9
3.6.2
Verifying Services
___________________________________________________________________10
4.
Troubleshooting
____________________________________________________________11
4.1
ONT Status LEDs
____________________________________________________________ 11
4.2
Troubleshooting Procedures
____________________________________________________ 13
313-12201-02 Rev. B: August 2007
Cambridge Industries Group Co. Ltd
V
Page 7 / 20
ONT G-25E Hardware Installation Manual
About This Document
Purpose
This guide describes how to install the CIG optical network termination unit (ONT) at the
customer premises.
Intended Audience
This document is intended for technicians responsible for:
z
Unpacking and mounting the ONT and power supply
z
Connecting the ONT to the PON network
z
Connecting services to the ONT
Chapter Overview
This manual is organized as follows:
Chapter 1: Product Description
Provides an introduction to the ONT including physical, electrical, environmental and optical
specifications. Compliance information is also provided.
Chapter 2: Safety
Provides electrical, electrostatic, and laser safety information; fiber optic cable handling
techniques are also discussed.
Chapter 3: Installing the ONT
Describes installation procedures including site preparation, unpacking and mounting the ONT,
connecting power and fiber optic and cables, connecting service cables, activating the ONT, and
verifying the installation.
Chapter 4: Troubleshooting
Explains ONT LED behavior and provides basic troubleshooting guidelines.
313-12201-02 Rev. B: August 2007
Cambridge Industries Group Co. Ltd
VI
Page 8 / 20
ONT G-25E Hardware Installation Manual
1.
Product Description
1.1
Introduction
Optical Network Terminal (ONT) model G-25E is an ITU-T G.984 compliant device that receives
voice, data, and video traffic in the form of optical signal from the service provider’s passive
optical network (PON) and transmitted it to the desired format - voice, data, or video - at
residential or business premises.
Upstream traffic is likewise transmitted to the PON network via the fiber optic cable. A single
optical fiber carries both upstream and downstream traffic.
1.2
Services
Equipped with ITU-T G.984 compliant 2.5G Downstream and 1.25G Upstream GPON UPLINK
interface, ONT G-25E supports the full Triple Play of services including voice, video (IPTV/VOD),
and high speed internet access.
ONT G-25E is equipped with the following service interfaces
1
:
z
Four 10/100 Base-T Ethernet ports for high speed internet access and IPTV/VOD services
z
Two POTS (VoIP) service ports for voice services
ONT G-25E has built-in capability for remote management like supervision, monitoring, and
maintenance.
1.3
Features
The ONT incorporates the following features:
z
Single fiber GPON interface with 1244Mbit/s upstream and 2488Mbit/s downstream data
rates
z
Advanced data features such as VLAN tag manipulation, classification, and filtering.
z
Traffic classification and QoS capability
z
Analog Telephone Adapter (ATA) function integrated based on SIP (RFC3261), with various
CLASS services supported - Caller ID, Call Waiting, Call Forwarding, Call Transfer, etc.
2
z
5 REN per line
z
Multiple voice Codec
z
Rich set of LED indications for alarming and maintenance
1
Some customized models may only provide a subset of service interfaces mentioned in this manual, for example, only four 10/100
Base-T Ethernet ports are provided.
2
These services may be unavailable within a specific carrier network and may require additional subscription.
313-12201-02 Rev. B: August 2007
Cambridge Industries Group Co. Ltd
1
Page 9 / 20
ONT G-25E Hardware Installation Manual
1.4
Specifications
ONT physical, electrical, optical, and environmental specifications and compliance information
are listed in the following tables.
Dimensions
127mm (height) by 170mm (width) by 39mm (depth)
Weight
0.4 KG excluding power adaptor
GPON interface
SC/APC angled optical connector
POTS
interface
RJ-11 connector
Ethernet
interface
RJ-45 connector
Table 1 Physical specification
Input Power
+12V DC power input
Power Supply
AC power supply with included power adapter
Power
Consumption
< 7.5W
Table 2 Electrical specification
Temperature
0 ~ 40° C
Humidity
5 ~ 85% relative humidity
Table 3 Environmental specification
PON
ITU-T G.984.1, G.984.2, G.984.2 amd1, G.984.3, G.984.4, G.983.2
EMC
ETSI EN 300386, EN 55022 (Class B)
EN 60950
Safety
z
ITU-T Rec.G.984.2 (Class B+), G983.3
z
FCC 47 CFR Part 15, Class B
Laser
z
FDA 21 CFR 1040.10 and 1040.11, Class I
z
IEC 60825, Class I
Table 4 Compliance
313-12201-02 Rev. B: August 2007
Cambridge Industries Group Co. Ltd
2
Page 10 / 20
ONT G-25E Hardware Installation Manual
Minimum
Nominal
Maximum
Notes
Transmitter
Wavelength
1260 nm
1310 nm
1360 nm
Transmit power
0.5 dBm
+5 dBm
Digital receiver
Wavelength
1480 nm
1490 nm
1500 nm
Minimum received power
for BER<10-10
Sensitivity
-27 dBm
Overload
-8 dBm
Maximum received power
for BER<10-10
Table 5 Optical specification
313-12201-02 Rev. B: August 2007
Cambridge Industries Group Co. Ltd
3

Rate

3.5 / 5 based on 2 votes.

Popular Cambridge Industries Group Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top