Page 26 / 84 Scroll up to view Page 21 - 25
26
WAN Config (WAN Port)
Here, you may choose how the AirStation
acquires an IP address.
Normally, the
internet connection wizard will set this for
you if you have a cablemodem or DSL.
If
you’re not sure what to choose, perform
Easy Setup
.
To setup PPPoE manually, click on
click
here
and turn to page 27.
Also on this page, under
Advanced Setup
,
you may manually set the Default Gateway,
DNS server, WAN MAC address, WAN
format, and WEB port number.
Click
Apply
when finished.
Page 27 / 84
27
PPPoE
Many DSL connections require a PPPoE
Connection in order to log in to an internet
connection.
Normally, the Easy Detection
Wizard will help you configure that, but
you may manually configure one here.
Consult your ISP for more information
on correctly configuring your PPPoE
connection.
To add a new PPPoE connection, click
Edit
Connection List
.
To choose your preferred
connection, click on
Edit Preferred
Connection List
.
Page 28 / 84
28
LAN Config (LAN Port)
Default for the
LAN side IP address
is
192.168.11.1.
To add the AirStation to an
existing LAN, specify a unique IPaddress, not
used elsewhere in the network.
The default Subnet Mask is 255.255.255.0.
To connect AirStation to an existing LAN,
specify the Subnet Mask that the LAN uses.
If there’s more than one DHCP server on
a network, disable all but one of them.
To have DHCP assign addresses from a
specific range, enter a begining address by
Assigned IP Address
and give the number
of addresses to assign in the
Addresses
box.
To exclude specific addresses from being
assigned by DHCP, specify them in the
Excluded IP Address
box.
Multiple IP addresses
may be specified by seperating them with a comma, e.g. 192.168.11.7,192.168.11.9.
You
can also specify an IP address range by start and end address connected by a dash, e.g.
192.168.11.15-192.168.11.21.
The ‘,’ and ‘-’ can be used at the same time, e.g. 192.1
68.11.7,192.168.11.9,192.168.11.15-192.168.11.21, up to a total string length of 128
characters.
Click the
Help
link in the top right corner for more information.
Page 29 / 84
29
Advanced DHCP Settings
This page offers the same DHCP settings as
the previous one, and in addition, offers you
the chance to change the
Lease Period
,
De-
fault Gateway
,
DNS servers
,
WINS serve
r, and
Domain Name
.
Click
Apply
when you have
the settings the way you want them.
To manually assign an IP address, click
Manual Assignment
.
Page 30 / 84
30
To manually link a LAN address to a MAC
address, enter them under
Add Client Infor-
mation
and click
Add
.
Current DHCP Client Information
shows
all LAN addresses currently assigned by
AirStation’s DHCP.
You may configure a
specific client to always recieve the same
IP address by clicking
Manual Assignment
to the right of its MAC Address.
Clicking
Delete
returns a manually assigned client
to normal DHCP operation.
Edit
allows
you to manually adjust a linked IP Address
and Mac Address in the Client Information
window above.
DHCP Server (Manual Assignment of IP Address)

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top