1. Home
    2. /
  2. Manuals
    3. /
  3. Buffalo
    4. /
  4. WCR-GN
    5. /
  5. 9
Page 41 / 109 Scroll up to view Page 36 - 40
WCR-GN User Manual
40
Chapter 4
Configuration
Route
The screen to configure the communication IP route that the AirStation uses.
Parameter
Meaning
Destination Address
Adds a destination IP address and subnet mask to a routing table.
Gateway
Adds a gateway address to a routing table.
Metric
The metric is the maximum number of router hops a packet may
take on the way to its destination address. Values between 1 and 15
may be entered. The default value is 15.
Routing Information
Manual entries will appear here after being added.
Page 42 / 109
Chapter 4
Configuration
WCR-GN User Manual
41
Wireless Config
WPS
The screen to see the detailed settings and status of WPS.
Parameter
Meaning
WPS
Enable to use WPS automatic configuration.
External Registrar
Enable to accept the external configure requests from other WPS
devices.
Note: External configure requests will not be accepted if AOSS is in use.
AirStation PIN
Displays the PIN code of the AirStation. Clicking“
Generate PIN
”
will generate a new PIN code. This code can be entered into other
wireless devices that support WPS.
Enrollee PIN
Enter the PIN code for the other wireless device and click“
OK
”.
WPS status
Displays WPS security information.“configured“ or“unconfigured“
will appear depending on the connection status. Refer to the online
help for more detail.
Page 43 / 109
WCR-GN User Manual
42
Chapter 4
Configuration
AOSS
The screen to see the detailed settings and status of AOSS.
Parameter
Meaning
Initiates AOSS automatic wireless configuration. Click this, then
press or click the AOSS button on your AOSS-compatible wireless
client. Repeat for additional AOSS clients.
Click this button to disconnect AOSS connections.
Note: If AOSS connections are disconnected, the SSID and encryption keys
will be restored to their most recent settings before using AOSS.
Page 44 / 109
Chapter 4
Configuration
WCR-GN User Manual
43
Parameter
Meaning
Encryption Type of Exclusive SSID for
WEP
You may allow a separate SSID specifically for WEP connections. If
“
disabled
”is selected, then clients will not be able to connect with
WEP.
Encryption level expansion function
Expands security method from TKIP to WPA/WPA2-PSK-mixed
mode.
Dedicated WEP SSID isolation
Set a separate SSID and network segment specifically for WEP
connections. Devices connected with WEP will not be able
to communicate with devices connected using AES/TKIP. All
connected devices will be able to communicate with the internet.
AOSS Button on the AirStation Unit
Determine whether configure AOSS or not when the physical AOSS
button is pressed.
Current Encryption Information
* AOSS Connection only
Displays the encryption type, SSID, an encryption key configured by
AOSS.
[Random]
Click to enter random values for SSID, encryption key, and other
settings.
[Reset]
Click to return the SSID, encryption key, and other wireless settings
to their previous values.
AOSS Client Information
*
* AOSS Connection only
Displays AOSS clients connected to the AirStation and information
of the devices which are wirelessly communicated.
Page 45 / 109
WCR-GN User Manual
44
Chapter 4
Configuration
Basic
The screen to configure a basic wireless settings.

Rate

3.5 / 5 based on 2 votes.

Popular Buffalo Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top