Chapter 4

Configuration

WBMR-HP-G300H User Manual

25

Parameter

Meaning

NAS

Click this button to display the configuration screen for NAS

settings.

Admin Config

Click this button to display the configuration screen for

administration settings.

Diagnostic

Click this button to display the status of the AirStation.

Easy Setup

Enables you to easily configure the AirStation’s network settings

automatically.

Internet Information

Displays WAN-side system information for the AirStation.

WIRELESS

Displays the current wireless settings.

AOSS Setup

Click this button to display the AOSS configuration screen.

WPS Setup

Click this button to display the WPS configuration screen.

ECO Mode

Displays the status of the ECO mode.

Network Service List

Displays the list of the network devices for which information is

provided from the network on the LAN-side.

Media Server

Displays the status of the media server.

Download List

Displays the list of BitTorrent files downloading.

Language

Enables you to select the language you use.

Logout

Log out from the configuration screen of the AirStation. If the

AirStation does not communicate for 5 minutes, it will log out

automatically.

WBMR-HP-G300H User Manual

26

Chapter 4

Configuration

Internet/LAN (LAN Config)

ADSL

The ADSL (Asymmetric Digital Subscriber Line) settings are made here. For details on the settings,

refer to the documentation provided by your ADSL provider.

Chapter 4

Configuration

WBMR-HP-G300H User Manual

27

Parameter

Meaning

Encapsulation

Set the ADSL communication method.

Obtain an IP Address

Automatically(DHCP)/Use this IP

Address

This option is displayed when RFC1483 Bridged is selected in the

Encapsulation field.

Select whether the IP address, subnet mask, gateway, and DNS are

obtained automatically or manually.

IP Address

Set the IP address of the AirStation.

Subnet Mask

Set the Internet subnet mask of the AirStation.

Default Gateway

Set the DNS server address specified by the provider.

Address of DNS Name Server

Set the DNS server address specified by the provider.

Service Name

Set the service name specified by the provider in 64 or less single-

byte alphanumeric characters.

User Name

Set the user name (PPP login name) specified by the provider in 64

or less single-byte alphanumeric characters and symbols.

If the name specified by the provider contains an @ mark, the

characters after the @ mark cannot be omitted when entering the

User Name.

Password

Set the password specified by the provider in 64 or less single-byte

alphanumeric characters and symbols.

Connect on Demand/Keep Alive

Select the Connect on Demand or Keep Alive.

When Connect on Demand is selected, the AirStation is

automatically connected to the server only when communication is

performed. The connection is disconnected if the communication is

not performed for a preset time (disconnect time).

Set the disconnect time in the range from 1 to 9999 minutes.

When Keep Alive is selected, the AirStation issues an LCP echo

request to the server periodically at preset time intervals, and

the response received from the server is used to confirm that

communication is enabled.

If no response from the server is received, the AirStation assumes

that the line is disconnected, and it disconnects the connection.

Set the Keep Alive time interval in the range from 20 to 180

seconds.

Host Name

Set the host name that is sent to the server when acquiring the IP

address from the Internet.

WBMR-HP-G300H User Manual

28

Chapter 4

Configuration

Parameter

Meaning

Domain Name

Set the domain name.

MTU

Set the MTU (Maximum Transmission Unit) that is used in

communication.

Select from Auto or Manual. When set to Manual, the available

range is from 576 to 1500 bytes.

Modulation

Set the modulation system used in ADSL communication.

Multiplexing

Set the encapsulation system for VC multiplexing.

Select from LLC (Logical Link Control Encapsulation) which can

handle multiple protocols or VC (Circuit Circuit) for a single

protocol.

QoS Type

Set the QoS (Quality of Service).

Select which of three service categories (UBR, CBR, VBR) for QoS to

guarantee.

PCR Rate

Set the PCR (Peak Cell Rate) when CBR or VBR is selected for QoS

Type. The network upper limit transfer speed is set in the range

from 1 to 65534 cps.

SCR Rate

Set the SCR (Sustainable Cell Rate) when CBR or VBR is selected

for QoS Type. The network sustainable transfer speed is set in the

range from 1 to 65534 cps.

Auto Detect

Set to VPI (Virtual Path Identification) or VCI (Virtual Channel

Identification) of the virtual circuit when Auto Detect is disabled.

Virtual Circuit

Set automatic detection of the virtual circuit.

Chapter 4

Configuration

WBMR-HP-G300H User Manual

29

DDNS (Router Mode only)

Configure Dynamic DNS settings.

Many settings are only available when the appropriate Dynamic

DNS service is enabled.

Parameter

Meaning

Dynamic DNS Service

Select a provider (DynDNS or TZO) for Dynamic DNS.

User Name

Enter the Dynamic DNS user name. You may enter up to 64

alphanumerical characters and symbols.

Password

Enter the Dynamic DNS password. You may enter up to 64

alphanumerical characters and symbols.

Host Name

Enter the Dynamic DNS host name. You may enter up to 255

alphanumerical characters, hyphens, and periods.

Email Address

Enter the email address which is registered to the Dynamic DNS

service. You may enter up to 64 alphanumerical characters and

symbols.

TZO Key

Enter the TZO Key which is registered to the Dynamic DNS service.

You may enter up to 64 alphanumerical characters and symbols.

Domain Name

Enter the domain name which is registered to the Dynamic DNS

service.

You may enter up to 255 alphanumerical characters,

hyphens, and periods.