30
MY HOME - CONTROL
Burglar alarm control
unit with dialling
device
item 3500, 3500N and
3500GSM
Telephone dialling
device
item N4075
The telephone dialling device is a device of the
MY HOME home automation system, which can
automatically dial the telephone numbers previously
set and forward one or more pre-recorded messages
on the normal telephone line (or GSM if 3500GSM).
It allows two-way communication between the
user, the burglar-alarm system and the automation
system. The programming and the remote use are
password (PSW) protected. The PSW is made up of
5 numeric characters and can be customised by the
user; if it is not modified it is 12345. The password
(PSW) must also be entered during an alarm call to
send the commands. The burglar-alarm control unit
with combined telephone dialling device performs
the same functions as the telephone dialling device
also combining the burglar-alarm functions.
Its functions can be divided into 4 categories:
ALARM MANAGEMENT
When the burglar-alarm system detects an alarm, it
activates to call the numbers set specifying the type
of alarm detected;
AUTOMATION
Following events detected by the burglar-alarm
system, it can determine the automatic operation of
other devices in the home;
ROOM MONITOR
When there is an anti-intrusion alarm it can listen to
the room and give messages in the rooms controlled
by the system;
TELEPHONE COMMANDS
The devices installed in the home can be
commanded using the fixed-line or the mobile phone
by using predefined codes or via the MY HOME
WEB Service (with a PC or an hand-held computer
connected to the Internet, a fixed-line or a mobile
phone).
MAIN FUNCTIONS
The telephone dialling device:
- allows two-way communication between the user,
the burglar-alarm system and the automation
system;
- when there are particular events such as an
alarm (example: intrusion alarm) or system fault,
it automatically calls the telephone numbers
previously set, specifying by means of pre-recorded
messages the type of alarm detected;
- commands an automatic operation following an
event detected by the burglar-alarm system;
- can be called by the user and by means of the
“open web net” commands or simplified commands
arranging the operation of devices inside the home;
- can be questioned either locally or by telephone, to
find out the state of an actuator of the automation
system for the lighting and automatic operation
functions;
- can be questioned by telephone to give information
on the state of the burglar-alarm system;
- allows continuous monitoring of the system
allowing, for example, a communication that there
has been a power cut for more than 2 hours;
- allows activating the “room monitor” function: the
giving of messages and listening to what happens
in the room. Locally just by the dialling device or in
all the rooms connecting the dialling device to the
BTicino sound system.
The device also makes available:
- the possibility of setting an extra joker telephone
number, common for all the messages, for easier
tracing;
- automatic recording of the internal memory of the
events which have happened and been detected by
the system;
- can connect with the BTicino “MY HOME” portal. The
MY HOME WEB services, such as sending an e-mail
when there is an alarm, are thus made available.
Burglar alarm control unit
with dialling device
19216811.live