23

Factory Default Settings

Before configuring your router, you need to know the following default settings.

Web Interface (Username and Password)

Three user levels are provided by this router, thus

Administrator

,

Remote

and

Local

respectively.

(Note: Administrator admin, is enabled by default, but the other two users need to be enabled

through manual settings by administrator. See

Access Control

section.)

Administrator

Username: admin

Password: admin

Local

Username: user

Password: user

Remote

Username: support

Password: support

Device LAN IPv4 settings

IPv4 Address: 192.168.1.254

Subnet Mask: 255.255.255.0

Device LAN IPv6 settings

IPv6 Address / prefix: Default is a link-local address and is different from each other as MAC

address is different from one to one. For example: fe80:0000:0000:0000:0204:edff:fe01:0001 / 64,

the prefix initiates by fe80::

DHCP server for IPv4

DHCP server is enabled.

Start IP Address: 192.168.1.100

IP pool counts: 100

24

LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory.

The default values are shown in

the table.

IPv4

LAN Port

WAN Port

IPv4 address

192.168.1.254

Subnet Mask

255.255.255.0

DHCP server function

Enabled

IP addresses for

distribution to PCs

100 IP addresses continuing

from 192.168.1.100 through

192.168.1.199

The PPPoE function is

enabled to automatically get

the WAN port configuration

from the ISP.

IPv6

LAN Port

WAN Port

IPv6 address/prefix

Default is a link-local address and is

different from each other as MAC

address is different from one to one.

For example :

fe80:0000:0000:0000:0204:edff:fe01:

0001/64, the prefix initiates by fe80::

DHCP server function

Enabled

The PPPoE function is

enabled to automatically get

the WAN port configuration

from the ISP.

25

Information from your ISP

Before configuring this device, you have to check with your ISP (Internet Service Provider) to find

out what kind of service is provided such as DHCP (Obtain an IP Address Automatically, Static IP

(Fixed IP Address) or PPPoE.

Gather the information as illustrated in the following table and keep it for reference.

PPPoE(RFC2516)

VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service

Name, and Domain Name System (DNS) IP address (it can be

automatically assigned by your ISP when you connect or be set manually).

PPPoA(RFC2364)

VPI/VCI, VC / LLC-based multiplexing, Username, Password and Domain

Name System (DNS) IP address (it can be automatically assigned by your

ISP when you connect or be set manually).

IPoA(RFC1577)

VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask, Gateway

address, and Domain Name System (DNS) IP address (it is a fixed IP

address).

Pure Bridge

VPI/VCI, VC / LLC-based multiplexing to use Bridged Mode.

26

Configuration via Web Interface

Open your web browser; enter the IP address of your router, which by default is 192.168.1.254, and

click

or press ‘Enter’ key on the keyboard, a login prompt window will appear. The default root

username and password are “admin” and “admin” respectively.

Congratulations! You are now successfully logged in to the Firewall Router!

If the authentication succeeds, the Status page below will appear on the screen.

27

Chapter 4: Configuration

Once you have logged on to your BiPAC 7800NL

Router via your web browser, you can begin to set

it up according to your requirements. On the configuration homepage, the left navigation pane links

you directly to the setup pages, which include:

Device Info

(Summary, WAN, Statistics, Route, ARP, DHCP)

Quick Start

Advanced Setup

(WAN, LAN, NAT, Security, Parental Control, Quality of Service, Routing, DNS,

DSL, UPnP, DNS Proxy, Interface Grouping, Certificate, Multicast)

Wireless

(Basic, Security, MAC Filter, Wireless Bridge, Advanced, Station Info)

Management

(System Log, SNMP Agent, TR-069 Client, Internet Time, Mail Alert, Wake on LAN,

Access Control, Remote Access, Update Software, Backup/Update)