Page 36 / 211
Scroll up to view Page 31 - 35
32
6.
Continue to set 5GHz wireless.
7.
Success in configuring the EZSO.
Click link
192.168.1.254
, it will lead you to the following page.
Page 37 / 211
33
Ethernet mode
1.
Select
Ethernet,
press
Continue
to go on to next step.
2.
Enter the username, password from your ISP, for IP and DNS settings, also refer to your ISP.
Here IPv6 service is enabled by default.
3.
Wait while the device is configured.
4.
WAN port configuration is success.
Click
Done
, web configuration will be loaded, you will enter the web configuration page.
Page 38 / 211
34
5.
After the configuration is successful, click
Next to Wireless
button and you may proceed to
configure the Wireless setting. The 7800DXL supports dual-band wireless, here you can set to
activate wireless on which band or both and set the SSID and encryption Key
(1. Leave it empty to
disable the wireless security; 2. Fill in the Key, and the encryption mode will be WPA2-PSK/AES)
.
6.
Continue to set 5GHz wireless.
7.
Success in configuring the EZSO.
Page 39 / 211
35
Click
192.168.1.254
, it will lead you to the following page.
Page 40 / 211
36
3G/LTE
1.
Select
3G/LTE,
press
Continue
to go on to next step.
2.
Enter the APN, username, password from your ISP, for settings about Authentication method, PIN,
etc, also refer to your ISP.
3.
Wait while the device is configured.
4.
WAN port configuration is success.
Click
Done
, web configuration will be loaded, you will enter the web configuration page.
19216811.live