27

Factory Default Settings

Before configuring your router, you need to know the following default settings.

Web Interface (Username and Password)

Three user levels are provided by this router, namely

Administrator

,

Remote

and

Local

respectively. See

Access Control

.

Administrator

Username: admin

Password: admin

Local

Username: user

Password: user

Remote

Username: support

Password: support

Attention

If you have forgotten the username and/or password of the router, you can restore the device

to its default setting by pressing the

Reset Button

more than

5

seconds.

Device LAN IPv4 settings

IPv4 Address: 192.168.1.254

Subnet Mask: 255.255.255.0

Device LAN IPv6 settings

IPv6 Address / prefix: Default is a link-local address and is different from each other as MAC

address is different from one to one. For example: fe80:0000:0000:0000:0204:edff:fe01:0001 / 64,

the prefix initiates by fe80::

DHCP server for IPv4

DHCP server is enabled.

Start IP Address: 192.168.1.100

IP pool counts: 100

28

LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory.

The default values are shown in

the table.

IPv4

LAN Port

WAN Port

IPv4 address

192.168.1.254

Subnet Mask

255.255.255.0

DHCP server function

Enabled

IP addresses for

distribution to PCs

100 IP addresses continuing

from 192.168.1.100 through

192.168.1.199

The PPPoE function is

enabled to automatically get

the WAN port configuration

from the ISP.

IPv6

LAN Port

WAN Port

IPv6 address/prefix

Default is a link-local address and is

different from each other as MAC

address is different from one to one.

For

example

:

fe80::204:edff:fe01:1/64,

the prefix initiates by fe80::

DHCP server function

Enabled

The PPPoE function is

enabled to automatically get

the WAN port configuration

from the ISP.

29

Information from your ISP

Before configuring this device, you have to check with your ISP (Internet Service Provider) to find

out what kind of service is provided.

Gather the information as illustrated in the following table and keep it for reference.

PPPoE(RFC2516)

VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service

Name, and Domain Name System (DNS) IP address (it can be

automatically assigned by your ISP when you connect or be set manually).

PPPoA(RFC2364)

VPI/VCI, VC / LLC-based multiplexing, Username, Password and Domain

Name System (DNS) IP address (it can be automatically assigned by your

ISP when you connect or be set manually).

DHCP Client

VPI/VCI, VC / LLC-based multiplexing, Domain Name System (DNS) IP

address (it can be automatically assigned by your ISP when you connect or

be set manually).

IPoA(RFC1577)

VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask, Gateway

address, and Domain Name System (DNS) IP address (it is a fixed IP

address).

Pure Bridge

VPI/VCI, VC / LLC-based multiplexing to use Bridged Mode.

30

Easy Sign On (EZSO)

This special feature makes it easier for you to configure your router so that you can connect to the

internet in a matter of seconds without having to logon to the router GUI for any detail configuration.

This configuration method is usually auto initiated if user is to connect to the internet via Billion's

router for the first time.

After setting up the router with all the appropriate cables plugged-in, open up your IE browser, the

EZSO WEB GUI will automatically pop up and request that you enter some basic information that

you have obtained from your ISP. By following the instructions given carefully and through the

information you provide, the router will be configured in no time and you will find yourself surfing the

internet sooner than you realize.

DSL mode

Before configuring with DSL mode, please confirm you have correctly connected the DSL line, and it

is now synchronized.

1.

Select DSL, press

Continue

to go on to next step, press “Done” to quit the setting.

2.

Enter the username, password from your ISP, for IP and DNS settings; also refer to your ISP.

Here IPv6 service is enabled by default.

If the DLS line doesn’t synchronize, the page will pop up warning of the DSL connection failure.

31

3.

Wait while the device is configured (DSL synchronized).

4.

WAN port configuration is success and next to wireless, if you want skip wireless setting, click

Done

.

Click

Done

, web configuration will be loaded, you will enter the web configuration page.

5.

After the configuration is successful, click

Next to Wireless

button and you may proceed to

configure the Wireless setting. The 7800DXL supports dual-band wireless, here you can set to

activate wireless on which band or both and set the SSID and encryption Key.

(1. Leave it empty to

disable the wireless security; 2. Fill in the Key, and the encryption mode will be WPA2-PSK/AES).