7

Hardware Specifications

Physical Interface

• WLAN: 2 x 2dbi fixed antennas

• DSL: ADSL port

• USB 2.0 port for storage service and printer server

• Ethernet: 4-port 10 / 100 / 1000Mbps auto-crossover (MDI / MDI-X) Switch

• EWAN: Ethernet port #4 can be configured as a WAN interface for Broadband

connectivity.

• Factory default reset button

• WPS push button

• WPS push button

• Power jack

• Power switch

8

Chapter 2: Installing the Router

Package Contents

•

BiPAC 7800DXL Dual-band Wireless-N 3G/4G LTE ADSL2+ Router

•

Quick Start Guide

•

CD containing the on-line manual

•

Two fixed dual-band antennas

• RJ-45 Cat. 5e STP Ethernet cable

•

RJ-11 ADSL/ telephone cable

•

Power adapter

•

Splitter / Micro-filter (Optional)

9

Important note for using this router

Warning

1. Do not use the router in high humidity or high temperatures.

2. Do not use the same power source for the router as other equipment.

3. Do not open or repair the case yourself. If the router is too hot, turn off the power

immediately and have it repaired at a qualified service center.

4. Avoid using this product and all accessories outdoors.

Attention

1. Place the router on a stable surface.

2. Only use the power adapter that comes with the package. Using a different voltage rating

power adapter may damage the router.

10

Device Description

The Front LEDs

LED

Status

Meaning

Red

Boot failure or in emergency mode

1

Power

Green

System ready

Green

Transmission speed hitting 1000Mbps

Orange

Transmission speed hitting 10/100Mbps

2

Ethernet Port

1-4 (EWAN)

Blinking

Data being transmitted/received

Green

Wireless connection established

3

Wireless

Green blinking

Sending/receiving data

Green blinking

WPS configuration being in progress

4

WPS

Off

WPS process completed or WPS is off

Green Blinking

DSL synchronizing or waiting for DSL synchronizing

Green

Successfully connected to an ADSL DSLAM (Line Sync).

5

DSL

Off

DSL cable unplugged

Red

Obtaining IP failure

Green

Having obtained an IP address successfully

6

Internet

Off

Router in bridge mode or DSL connection not present.

11

The Rear Ports

Port

Meaning

1

Power Switch

Power ON / OFF switch.

2

Power

Connect the supplied power adapter to this jack.

3

RESET

After the device is powered on, press it

5 seconds or above

: to restore to factory

default settings (this is used when you cannot login to the router, e.g. forgot the

password)

4

WPS

Push WPS button to trigger Wi-Fi Protected Setup function.

5

USB

Connect the USB device (Printer, USB 2.0 storage, 3G/LTE 3G USB modem) to this

port.

6

Ethernet

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four LAN ports when

connecting to a PC or an office/home network of 10Mbps /100Mbps /1000Mbps.

Note:

Port #4 can be configured as a WAN Interface for Broadband connectivity.

7

DSL

Connect this port to the DSL network with the RJ-11 cable (telephone) provided.

8

Antenna

The fixed dual-band antennas.