1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. F9K1002v3
    5. /
  5. 4
Page 16 / 42 Scroll up to view Page 11 - 15
14
TECHNICAL DETAILS
Technical Features
Integrated 802°11n Wireless Access Point
Utilizing MIMO (Multiple Input Multiple Output) smart-
antenna technology, your Router can reach data transfer
speeds of up to 300Mbps across your network.
NAT IP Address Sharing
To save you the cost of adding IP addresses per
computer in your house, your Belkin Router uses Network
Address Translation (NAT) technology, allowing you to
share a single IP address across your network.
SPI Firewall
Your Router is equipped with a firewall that will protect your
network from a wide array of common attacks and viruses.
Web-Based Advanced User Interface
You can easily make changes to your Router’s advanced
settings through your web browser. These changes can
be made from any computer on your network.
Belkin Router Monitor
The Belkin Router Monitor application helps you to monitor
your Router’s status and change network settings.
Integrated 4-Port 10/100 Switch
Your Router has a built-in, 4-port network switch to
allow your wired computers to share: printers, data,
MP3 files, digital photos, and much more.
Page 17 / 42
15
TECHNICAL DETAILS
System Requirements
Router
Broadband Internet connection such as a cable or
DSL modem with RJ45 (Ethernet) connection
At least one computer with an installed network interface adapter
TCP/IP networking protocol installed on each computer
RJ45 Ethernet networking cable
Internet browser
Setup Software
A computer running Windows
®
XP SP3 or higher, Windows
Vista
®
, or Windows 7; or Mac OS
®
X v10.5 or v10.6 only
Minimum 1GHz processor and 512MB RAM
600MB of free hard-drive space for installation
Page 18 / 42
16
USING YOUR ROUTER
Enabling Auto Update on Your Belkin Router
The Router has the capability to automatically check
for a newer version of firmware and alert you when it’s
available. You can choose to download the new version or
ignore it. By default this feature is disabled. If you want to
enable it, select “Enable” and click “Apply Changes”.
Note:
We recommend you use a computer that
has a wired connection to the Router.
Setup steps:
1°
Open a web browser on the computer.
2°
In the address bar of the web browser, type “http://192.168.2.1”.
3°
Click “Login” in the upper right-hand corner of the page. The
Router does not ship with a password, so just click “Submit”.
Page 19 / 42
17
USING YOUR ROUTER
17
5°
Toward the lower-half side of the screen you will
find “Auto Update Firmware Enabling”.
6°
Select “Enable” by clicking the radio button and then
click “Apply Changes” at the bottom of the screen.
4°
Click on “System Settings” in the left-hand
column under the “Utilities” heading.
Page 20 / 42
18
USING YOUR ROUTER
18
Updating Your Router via Your System
Tray (Windows) or Menu Bar (Mac)
Once you have completed the setup process, you will need
to update the new software for your Router. This can be done
easily via your computer’s system tray or menu bar.
Setup steps:
1°
Click on the blue Belkin Router Manager icon (right-click for
Windows) in your system tray (Windows) or menu bar (Mac).
2
.
Select “Check for Updates” or “Update Available” from the menu.
3°
You should now see the Belkin Updater window.
4°
Click on the “Install Update” icon.

Rate

3.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top