1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. F5D7230-4v4
    5. /
  5. 5
Page 21 / 112 Scroll up to view Page 16 - 20
Connecting and Configuring your Router
19
section
2
1
3
4
5
6
7
8
9
10
Step 3
Check the Connection
3.1
Once you have completed
connecting the Router, the Wizard
will check the connection to the
Router and then go on to determine
what type of Internet connection
you have.
3.2 User Name and Password Needed
If you have a connection type
that requires a user name and a
password, the Wizard will ask you
to type in your user name and
password. If your connection type
does not require a user name and
password, you will not see
this screen.
Your user name and password is
provided to you by your Internet
Service Provider. If you have to
type in a user name and password
to connect to the Internet, then
type that same user name and
password in here. Your user
name looks something like
“[email protected]” or simply
“jsmith”. The service name is
optional and is very rarely required
by your ISP. If you don’t know your
service name, leave this blank.
When you have entered your
information, click “Next” to
move on.
Page 22 / 112
20
Connecting and Configuring your Router
3.3 Wireless Setup
This step is optional.
Click “Next”
if you want to skip it.
Using this step, you can customize
your wireless network settings if
you want to. Follow the steps on
the screen to complete this step.
Click “Next” to continue.
Step 4
Configure the Router
The Wizard will now transfer all of the configuration information to the
Router. This will take approximately one minute. During this time, do
not turn off the Router or computer. The Router will restart itself at the
end of this step.
4.1 Checking Internet
The Wizard will now check for an
Internet connection. This can take
a few minutes. The Wizard may not
detect a connection right away. If
not, it will retry a number of times.
The “Connected” light on the front
panel of the Router will flash during
this time. Please be patient through
this process.
Page 23 / 112
Connecting and Configuring your Router
21
section
2
1
3
4
5
6
7
8
9
10
4.2
Finished
When the Internet connection
is complete, the Wizard will tell
you that you are finished. The
“Connected” LED on the front of
the Router will be solid GREEN,
indicating that the Router is now
connected to the Internet.
Your Router is now connected to the Internet. Now you can begin
surfing the Internet by opening your browser and going to your favorite
web page.
Congratulations.
You have finished installing your new Belkin Router.
You are ready to set up the other computers in your home. You can
also add computers to your Router anytime you want.
Page 24 / 112
22
Alternate Setup Method
The Web-Based Advanced User Interface is a web-based tool that
you can use to set up the Router if you don’t want to use the Easy
Install Wizard. You can also use it to manage advanced functions of
the Router. From the
Web-Based
Advanced User Interface, you can
perform the following tasks:
•
View the Router’s current settings and status
•
Configure the Router to connect to your ISP with the settings that
they provided you
•
Change the current network settings such as the Internal IP
address, the IP address pool, DHCP settings, and more
•
Set the Router’s firewall to work with specific applications
(port forwarding)
•
Set up security features such as client restrictions, MAC address
filtering, WEP, and WPA
•
Enable the DMZ feature for a single computer on your network
•
Change the Router’s internal password
•
Enable/Disable UPnP (Universal Plug-and-Play)
•
Reset the Router
•
Back up your configuration settings
•
Reset the Router’s default settings
•
Update the Router’s firmware
Step 1
Connect your Router
1.1
Turn off the power to your modem by unplugging the power
supply from the modem.
1.2
Locate the network cable that is connected between your modem
and your computer and unplug it from your computer, leaving the
other end connected to your modem.
1.3
Plug the loose end of the cable you just unplugged into the port
on the back of the Router labeled “Modem”.
1.4
Connect a new network cable (not included) from the back of
the computer to one of the wired computers ports labeled “1–4”.
Note:
It does not matter which numbered port you choose.
Page 25 / 112
Alternate Setup Method
23
section
2
1
3
4
5
6
7
8
9
10
1.5
Turn your cable or DSL modem on by reconnecting the power
supply to the modem.
Note:
Your Router may have ports in different locations than
depicted in the illustration above.
1.6
Before plugging the power cord into the Router, plug the cord
into the wall, then plug the cord into the Router’s power jack.
1.7
Verify that your modem is connected to the Router by checking
the lights on the front of the Router. The green light labeled
“Modem” should be ON if your modem is connected correctly to
the Router. If it is not, recheck your connections.
1.8
Verify that your computer is connected properly to the Router by
checking the lights labeled “1-4”. The light that corresponds to
the numbered port connected to your computer should be ON
if your computer is connected properly. If it is not, recheck your
connections.
To power adapter
Mac or PC computer that was originally
connected to the cable or DSL modem
Network cable
(to computer)
Existing networking cable
(came with modem)

Rate

3.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top