1. Home
    2. /
  2. Manuals
    3. /
  3. Belkin
    4. /
  4. F5D5730au
    5. /
  5. 2
Page 6 / 30 Scroll up to view Page 1 - 5
8
Connecting your Modem
Connecting your Modem
9
section
2
1
3
4
5
6
7
6.
Select “Search
for the best driver
for your device.
(Recommended).” and
click “Next”
7.
Place a tick next to
“CD-ROM drive” and
click “Next”
8.
Click “Next” on the
following screen
9.
Once the installer has
finished, click finish.
Connecting your ADSL Line
Connection for the Modem to the ADSL line varies by country and
region. Typically it involves line filter or a line filter with built-in splitter
to allow simultaneous use of ADSL service and telephone service on
the same telephone line. Please read the following steps carefully and
select appropriate method.
1.
If your telephone service and ADSL service are on the same
telephone line, ADSL line filters are needed for each telephone
and device, such as answering machine, fax machine, and caller
ID display. Additional splitters may be used to separate telephone
lines for telephone and the Modem.
Note: Do not connect the ADSL line filter between the wall jack
and the Modem—this will prevent ADSL service from reaching the
Modem.
2.
If your telephone service and ADSL service are on the same
Page 7 / 30
11
10
Connecting your Modem
Setting up your Computer
11
section
2
1
3
4
5
6
7
telephone line and you are using an ADSL line filter with built-in
splitter, connect the splitter to the telephone wall jack providing
ADSL service. Then, connect the telephone cord from the ADSL
line filter RJ11 port generally labelled “ADSL” to the RJ11 port
labelled “ADSL” on the back of your Modem. Connect telephony
device to the other port on the ADSL splitter commonly labelled
“Phone”. An additional ADSL line filter is needed for another
telephone and device on the same line.
Note: One RJ11 telephone cord is supplied. When inserting an
RJ11 plug, be sure the tab on the plug clicks into position to
ensure that it is properly seated.
3.
If you have a dedicated ADSL service telephone line with an RJ11
wall jack, simply connect a telephone cord from the wall jack to
the RJ11 port labelled “ADSL” on the back of your Modem.
In order for your computer to properly communicate with your Modem,
you will need to change your computer’s “TCP/IP Ethernet” settings to
“Obtain an IP address automatically/Using DHCP”. This is normally the
default setting in most home computers.
Manually Configuring Network Adapters in Windows XP,
2000, or NT
1.
Click “Start”, “Settings”, and then “Control Panel”.
2.
Double-click on the “Network and dial-up connections” icon
(Windows 2000) or the “Network Connections” icon (Windows
XP).
3.
Right-click on
the “Local Area
Connection”
associated with your
network adapter and
select “Properties”
from the drop-down
menu.
4.
In the “Local
Area Connection
Properties” window,
click “Internet
Protocol (TCP/
IP)” and click the
“Properties” button.
5.
If not already
selected, select “Obtain an IP address automatically” and “Obtain
DNS server address automatically”. Click “OK”.
Page 8 / 30
12
Setting up your Computer
Setting up your Computer
13
section
2
1
3
4
5
6
7
Your network adapter(s) are now configured for use with the Modem.
Manually Configuring Network Adapters in
Windows 98SE or Me
1.
Right-click on
“My Network
Neighbourhood” and
select “Properties”
from the drop-down
menu.
2.
Select “TCP/IP ->
settings” for your
installed network
adapter.
3.
If not already
selected, select
“Obtain an IP address
automatically” on the
IP address tab.
4.
Click the “Gateway” tab. Highlight anything listed under “Installed
Gateways”, and click “Remove”
5.
Click the “DNS Configuration” tab. Click “Disable DNS”
6.
Click “OK”.
Restart the computer. When the computer restarts, your network adapter(s) are
now configured for use with the Modem.
Manually Configuring Network Adapters in Mac OS up to 9.x
In order for your computer to properly communicate with your Modem, you will
need to change your Mac computer’s TCP/IP settings to DHCP.
1.
Pull down the Apple menu. Select “Control Panels” and select “TCP/IP”.
2.
You will see the TCP/IP control panel. Select “Ethernet Built-In” or
“Ethernet” in the “Connect via:” drop-down menu.
3.
Next to “Configure”, if not already set, choose “Using DHCP Server”. This
will tell the computer to obtain an IP address from the Modem.
Manually Configuring Network Adapters in Mac OS X
1.
Click on the “System Preferences” icon.
2.
Select “Network” from the “System Preferences” menu.
3.
Select “Built-in Ethernet” next to “Show” in the Network menu.
4.
Select the “TCP/IP” tab. next to “Configure”, you should see “Manually”
or “Using DHCP”. If you do not, check the PPPoE tab to make sure that
“Connect using PPPoE” is NOT selected.
5.
If not already selected, select “Using DHCP” next to “Configure”, then click
“Apply Now”.
Page 9 / 30
14
Setting up your Computer
Setting up your Computer
15
section
2
1
3
4
5
6
7
Your network adapter(s) are now configured for use with the Modem.
Recommended Web Browser Settings
In most cases, you will not need to make any changes to your web
browser’s settings. If you are having trouble accessing the Internet or the
advanced web-based user interface, then change your browser’s settings
to the recommended settings in this section.
Internet Explorer 4.0 or Higher
1.
Start your web browser. Select “Tools” then “Internet Options”.
2.
In the “Internet Options” screen, there are three selections:
“Never dial a connection”, “Dial whenever a network connection is
not present”, and “Always dial my default connection”. If you can
make a selection, select “Never dial a connection”. If you cannot
make a selection, go
to the next step.
3.
Under the “Internet
Options” screen, click
on “Connections”
and select “LAN
Settings...”.
4.
Make sure there
are no check marks
next to any of the
displayed options:
“Automatically
detect settings”,
“Use automatic
configuration script”,
and “Use a proxy
server”. Click “OK”.
Then click “OK” again in the “Internet Options”
page.
Netscape Navigator 4.0
or Higher
1.
Start Netscape,
click on “Edit” then
“Preferences”.
2.
In the “Preferences”
window, click on
“Advanced” then
select “Proxies”. In
the “Proxies” window,
select “Direct
connection to the Internet”.
Mozilla FireFox 1.0 or
Higher
1.
Start FireFox, click
on “Tools” then
“Options”
2.
In the “General” tab,
click “Connection
Settings”
3.
Select “Direct
Page 10 / 30
17
16
Setting up your Computer
Manually Configuring your Modem
17
section
2
1
3
4
5
6
7
connection to the Internet” and then click OK.
MAC OS – Safari
1.
Start Safari
2.
Click “Preferences”.
3.
Click the “Advanced” tab.
4.
Click “Change Settings”. The Network panel will open to the
Proxies tab.
5.
Verify all boxes are unchecked. To remove a checkmark, click in
the box once.
6.
Click the “Apply Now” button.
7.
Close “System Preferences“
8.
Close the “Preferences”.
Understanding the Web-Based User Interface
The Modem can be configured by any browser such as Internet
Explorer 4.0 or above. Using the web management interface, you may
configure the Modem and view statistics to monitor network activity.
Type “10.1.1.1” (do not type in anything else such as “http://” or
“www”) in your browser’s address bar. Then press the “Enter” key.
The following screen will
appear in your browser
to prompt you to log in.
The default Password
is “admin”. Enter the
Password, and then click
the “Log In” button to log
in.
Navigating the Web Browser Interface
The Modem’s management interface consists of a Setup Wizard and
an Advanced Setup section.
Setup Wizard
Use the Setup Wizard to quickly configure the Modem with your
username and password.
Advanced Setup
Advanced Setup offers more advanced functions such as hacker
attack detection, IP and MAC address filtering, virtual server setup,
virtual DMZ host, and many more functions.

Rate

3.5 / 5 based on 2 votes.

Popular Belkin Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top