18

Information from your ISP

Before configuring this device, you have to check with your ISP (Internet Service Provider) to find

out what kind of service is provided such as DHCP (Obtain an IP Address Automatically, Static IP

(Fixed IP Address) or PPPoE.

Gather the information as illustrated in the following table and keep it for reference.

PPPoE(RFC2516)

VPI/VCI, VC / LLC-based multiplexing, Username, Password, Service

Name,

and

Domain

Name

System

(DNS)

IP

address

(it

can

be

automatically assigned by your ISP when you connect or be set manually).

PPPoA(RFC2684)

VPI/VCI, VC / LLC-based multiplexing, Username, Password and

Domain Name System (DNS) IP address (it can be automatically

assigned by your ISP when you connect or be set manually).

MPoA(RFC1483/

RFC2684)

VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask,

Gateway address, and Domain Name System (DNS) IP address (it is a

fixed IP address).

IPoA(RFC1577)

VPI/VCI, VC / LLC-based multiplexing, IP address, Subnet mask,

Gateway address, and Domain Name System (DNS) IP address (it is a

fixed IP address).

Pure Bridge

VPI/VCI, VC / LLC-based multiplexing to use Bridged Mode.

19

Chapter 4: Configuration

Open your web browser, enter the IP address of your router, which by default is 192.168.1.254, and

click “Go”, a login window prompt will appear. The default username and password are “admin” and

“admin” respectively.

Congratulations! You are now successfully logon to the BEC 7800 Firewall Router!

If the authentication succeeds, the homepage “Device Info - Summary” will appear on the screen.

20

Quick Start

Step 1: Select WAN port connect mode from the connect mode drop down menu. There are two

types of connect mode to choose from: ADSL or EWAN

Step 2: After selecting the connect mode, press Continue to move on to the next configuring page.

There are 5 types of connection protocols available under ADSL connect mode while there are 2

types of connection protocols available for EWAN connect mode.

Each type of connection mode is

described in the following sections of ADSL Connect mode and EWAN Connect mode.

21

Step 3: After finishing configuring the WAN connection, press Continue to finish the QuickStart. At

this time, you will see the system rebooting itself to apply the changes.

ADSL Connect Mode

For ADSL connect mode there are 5 types of connection protocols:

PPPoE, PPPoA, IPoA, MPoA

and

Pure Bridge

.

PPPoE

VPI/VCI:

Enter the information provided by your ISP.

Username:

Enter the username provided by your ISP. You can input up to 256 alphanumeric

characters (case sensitive). This is in the format of “username@ispname” instead of simply

“username”.

Password:

Enter the password provided by your ISP. You can input up to 32 alphanumeric

characters (case sensitive).

Service Name:

This item is for identification purposes. If it is required, your ISP will provide you

the necessary information. Maximum input is 32 alphanumeric characters.

Encapsulation mode:

Select the encapsulation format. Select the one provided by your ISP.

Authentication method:

Default is Auto. Please consult your ISP on whether to use Chap, Pap or

MSCHAP.

PPP IP Address:

Your WAN IP address. Leave the IP address as 0.0.0.0 to enable the device to

automatically obtain an IP address from your ISP.

22

PPPoA

VPI/VCI:

Enter the information provided by your ISP.

Username:

Enter the username provided by your ISP. You can input up to 256 alphanumeric

characters (case sensitive). This is in the format of “username@ispname” instead of simply

“username”.

Password:

Enter the password provided by your ISP. You can input up to 32 alphanumeric

characters (case sensitive).

Service Name:

This item is for identification purposes. If it is required, your ISP will provide you

the necessary information. Maximum input is 32 alphanumeric characters.

Encapsulation mode:

Select the encapsulation format. Select the one provided by your ISP.

Authentication method:

Default is Auto. Please consult your ISP on whether to use Chap, Pap or

MSCHAP.

PPP IP Address:

Your WAN IP address. Leave the IP address as 0.0.0.0 to enable the device to

automatically obtain an IP address from your ISP.