Bandluxe R529 Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

Bandluxe

R529

Page 26 / 66 Scroll up to view Page 21 - 25

Router Setup

1. Click

Add

2. In the

Destination LAN IP

field,

enter the Destination IP address

that will be assigned to a specific network or host.

3. In the

Subnet Mask

field,

enter the subnet mask associated with

the Destination IP.

4. In the

Interface/Gateway IP

field, click on the drop down list to

configure the IP value for the

LAN & Wireless

, and

Internet

is the address of the gateway device that allows for contact

between the Router and the remote network or host.

LAN &

Wireless

and

Internet

indicates whether the Destination IP is on

the local network (

LAN & Wireless

) or WAN (

Internet

To apply the changes, click

Save Settings

To cancel the latest changes without saving the changes, click

Undo

To delete a client, activate the appropriate checkbox in the

Select

column

and click

Del

VPN Passthrough

Virtual Private Network (VPN)

is a type of secured private network

connection, built upon publicly-accessible infrastructure such as the

Internet.

IPSec Passthrough

IP Security (IPSec) provides authentication and encryption. Since it is

mainly a Layer 3 technology, it can secure all data on the network.

PPTP Passthrough

Point-to-Point Tunneling Protocol (PPTP) allows you to establish virtual

private networks.

L2TP Passthrough

Layer 2 Tunneling Protocol (L2TP) is an extension of the Point-to-Point

Tunneling Protocol and is also used to establish virtual private networks.

Page 27 / 66

WiFi Setup

Basic WiFi Network

Wireless Settings

Enable WiFi Interface:

Select this option to enable the WiFi feature on

the router.

Network Name (SSID):

Network Name is used for identifying the

Wireless LAN (WLAN).

Standard Channel:

The radio channel number. The permissible

channels depend on the Regulatory Domain (e.g in the USA, it is 1 to 11).

Page 28 / 66

WiFi Setup

Working Mode:

From this drop-down menu, you can select the type of

wireless standard for your WiFi network.

Transmit Power:

The power level for WiFi transmission to be used by

the router.

RTS Threshold:

This value should remain at its default setting. If

inconsistent data flow is a problem, only a minor modification should be

made.

CTS Protection Mode:

CTS (Clear To Send) is a function used to

minimize collisions among wireless devices on a wireless local area

network (WLAN). The default setting is

Auto

and the Router

automatically uses CTS Protection Mode when your Wireless-G

products are experiencing severe problems and are not able to transmit

to the Router in an environment with heavy traffic. This function boosts

the Router’s ability to catch all Wireless

-B and Wireless-G

transmissions, but it severely decreases performance.

Preamble Length:

The preamble is used by the client PC receiver to

acquire the wireless signal and synchronize with the router's transmitter.

The router supports

Long Preamble

and

Short Preamble

. Selecting

Long Preamble

results in longer preamble transmission times yet

supports legacy 802.11 systems.

Short Preamble

reduces the

preamble transmission time but is not compatible with legacy 802.11

systems. The default setting,

Short Preamble

, should be used unless

you are experiencing WiFi problems such as frequent disconnects,

slow upload/download along with a low signal strength.

SSID Suppress:

For security purposes, you may choose to hide your

netwo

rk’s SSID by selecting

Enable

from the drop-down list. This will

prevent computers scanning for the presence of wireless networks to

detect your network name.

Security

Authentication Type:

Allows you to configure the authentication method

used to the router to authenticate clients. The router supports the

following authentication types:

Open System, 802.1x, Shared Key, WPA,

WPA2, WPA-WPA2-Mixed, WPA PSK, WPA2 PSK, WPA-WPA2-Mixed

PSK.

Encryption:

Select the type of encryption on the data that is transmitted

between the router and the clients. The router supports the following

authentication types:

WEP, TPIK, AES, TPIKAES.

Page 29 / 66

WiFi Setup

Open System

This wireless standard uses no authentication.

Encryption:

Choose

NONE or WEP

from the drop down list.

WEP:

The Router supports two WEP (Wired Equivalent Privacy)

standards: 64-bit and 128-bit. Select a standard from the drop-down list.

The 64-bits encryption requires 10 hexadecimal digits (letters a-f and

numbers 0-9 are valid). The 128-bits encryption requires 26 hexadecimal

digits (letters a-f and numbers 0-9 are valid).You can set up to four

different keys.

802.1x

IEEE 802.1x is an authentication system for devices connecting to a WiFi

network. This system requires the use of an authentication server that is

part of the network.

Encryption:

Only

WEP

is available.

Rekey Interval:

Enter a key renewal value to tell the Router how often it

should change the encryption keys.

RADIUS stands for Remote Authentication Dial-In User Service. It is a

networking protocol that uses access servers to provide centralized

management of access to large networks.

RADIUS Server:

Enter the IP Address of the RADIUS server.

RADIUS Port:

Enter the port number of the RADIUS server..

RADIUS Key:

Enter the key shared between the Router and the server.

Shared Key

An authentication system that uses a simple challenge/response protocol

with a WEP key.

Encryption:

Only

WEP

is available.

WPA

WPA, or WiFi Protected Access, is a WiFi standard that was designed to

improve the security features of WEP. WPA uses two encryption methods,

TKIP and AES, with dynamic keys. This option features WPA used in

coordination with a RADIUS server. (This should only be used when a

RADIUS server is connected to the Router.)

Page 30 / 66

WiFi Setup

Encryption:

Choose

TKIP, AES, TKIPAES

from the drop down list. AES

is a stronger encryption method than TKIP. TKIPAES uses either TKIP or

AES during the connection.

Rekey Interval:

Enter a key renewal value to tell the Router how often it

should change the encryption keys..

RADIUS Server:

Enter the IP Address of the RADIUS server.

RADIUS Port:

Enter the port number of the RADIUS server.

RADIUS Key:

Enter the key shared between the Router and the server.

WPA2

WPA2 is a more advanced, more secure version of WPA. This option

features WPA used in coordination with a RADIUS server. (This should

only be used when a RADIUS server is connected to the Router.)

Encryption:

Choose

TKIP, AES, TKIPAES

from the drop down list.

Rekey Interval:

Enter a key renewal value to tell the Router how often it

should change the encryption keys.

RADIUS Server:

Enter the IP Address of the RADIUS server.

RADIUS Port:

Enter the port number of the RADIUS server.

RADIUS Key:

Enter the key shared between the Router and the server.

WPA - WPA2 - Mixed

WPA and WPA2 Mixed means the router uses both WPA and WPA2 for

authentication and allows the client PC to choose between the two

methods. This option features WPA used in coordination with a RADIUS

server. (This should only be used when a RADIUS server is connected to

the Router.)

Encryption:

Choose

TKIP, AES, TKIPAES

from the drop down list.

Rekey Interval:

Enter a key renewal value to tell the Router how often it

should change the encryption keys.

RADIUS Server:

Enter the IP Address of the RADIUS server.

RADIUS Port:

Enter the port number of the RADIUS server.

RADIUS Key:

Enter the key shared between the Router and the server.

WPA PSK

Also known as WPA Personal, this authentication system does not require

Rate

Popular Bandluxe Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share