Page 6 / 50 Scroll up to view Page 1 - 5
User Manual
Page 6
of 50
Firmware Features
ADSL Support
ADSL Support
ADSL Support
ADSL Support
°
ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant
°
G.992.3 (ADSL2), G.992.5 (ADSL2+), RE-ADSL Ready
°
ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)
°
AAL ATM Attributes - AAL5
°
Multiple PVC up to 8 support
°
Spectral compatibility with POTS
°
F4 & F5 OAM Loopback/Send and Receive
°
Annex A, Annex B, Annex M Support
°
TR048 and TR067 compliant
°
PVC support
Encapsulation Support
Encapsulation Support
Encapsulation Support
Encapsulation Support
°
RFC2684 Bridge and Routed LLC and VC Mux support
°
RFC2364 PPPoA Client support
°
RFC2516 PPPoE Client support
°
RFC2225/RFC1577 Classical IP Support
°
Transparent Bridge Support
°
PAP/CHAP/MS-CHAP for Password Authentication Support
Network Support
Network Support
Network Support
Network Support
°
Static IP, Dynamic RIP v1/v2 routing support
°
IP/TCP/UDP/ICMP/ARP Application Support
°
Network Address Translation (NAT)
°
PVC to VLAN Mapping
°
Port Forwarding/Triggering
°
Easy setup of Port Forwarding rules for popular Games/Application
°
NAT Application Level Gateway for popular applications
°
DHCP Server/client
°
DNS Relay Agent
°
DMZ support
Page 7 / 50
User Manual
Page 7
of 50
°
SIP ALG (Application Layer Gateway) support
°
Multiple Sessions IP Sec and PPTP/L2TP VPN pass through support
°
PPP Always on
°
PPP Dial on Demand with configurable timeout
°
Universal Plug and Play Support
°
DDNS (Dynamic DNS) Support
°
IGMP Proxy Support (IGMP v1 and v2)
°
SNTP Support
°
QoS Support (DSCP, TOS), including Diffserv, IEEE802.1p - Priority bit, IEEE802.1q -
VLAN triggering
WLAN Suppor
WLAN Suppor
WLAN Suppor
WLAN Support
t
t
t
°
Wireless on Motherboard (WOMBO)
°
IEEE 802.11, 802.11b and 802.11g compliant
°
Supports 802.11b, 802.11g simultaneously
°
Transmit output power up to 20dBm (standard)
°
Conforms to Wireless Ethernet Compatibility Alliance (WECA) Wireless Fidelity (Wi-
Fi
tm
) Standard
°
Support seamless WLAN roaming
°
Frequency Band:
-
2412 MHz - 2462 MHz (North America/FCC)
-
2412 MHz - 2472 MHz (ETSI/Europe)
-
2412 MHz - 2484 MHz (Japan)
-
2457 MHz - 2472 MHz (France)
-
2457 MHz - 2462 MHz (Spain)
°
Support Direct Sequence Spread Spectrum (DSSS) technology
°
Modulation: OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK
°
Wireless Media Access Protocol- CSMA/CA with ACK
°
64/128 WEP Encryption
°
WPA/WPA2 Support
°
MAC filtering Support
°
Dynamic Rate Scaling from 54, 48, 36, 24, 12, 11, 9, 6, 5.5, 2, 1 Mb/s
°
Operating Range of up to 300 feet (Open Air)
Page 8 / 50
User Manual
Page 8
of 50
Management Support
Management Support
Management Support
Management Support
°
Web Based HTTP management GUI
°
Web Based Firmware Upgrade (Local)
°
Soft Factory Reset Button via Web GUI
°
Diagnostic Test (DSL, OAM (ADSL), Network (ADSL), Ping Test)
°
TR068 - WAN Access
°
Telnet with CLI (Read and Write) configuration
°
Syslog Support
°
Firmware upgradeable for future feature enhancement
°
Quick firmware upgrade button (depopulation option)
°
TR-069 Compliant (optional)
°
SNMP v1 and v2 (optional)
°
SSH Support (optional)
Security Support
Security Support
Security Support
Security Support
°
NAT for basic Firewall support
°
Packet Filtering Firewall Support
°
Stateful Packet Inspection Support
°
Protection against Denial of Service attacks
°
Password Authentication to Modem
°
Parental Control
°
Real-Time Attack and Alert Logs (optional)
Page 9 / 50
User Manual
Page 9
of 50
Requirements
Your computer must meet the following minimum requirements.
°
Any operating system can be used
°
Web Browser
°
CDROM drive
°
233MHz processor
°
Ethernet network adapter
°
An active DSL Internet account
Package Contents
Package contents are listed below. For any missing items, please contact your dealer
immediately. Product contents vary for different models.
°
Router
°
Ethernet cable
°
Telephone cable
°
POTS Splitter (optional)
°
12V 1.0A DC Power Adapter
°
Easy Start Guide
°
Resource CD
Page 10 / 50
User Manual
Page 10
of 50
Device Design
Front Panel
Label
Label
Label
Label
Icon
Icon
Icon
Icon
Action
Action
Action
Action
Description
Description
Description
Description
1
POWER
POWER
POWER
POWER
Off
Steady green
Steady red
No power is supplied to the device
Connected to an AC power supply
Error on the device
2
ETHERNET LAN
ETHERNET LAN
ETHERNET LAN
ETHERNET LAN
Off
Steady green
Blinking green
No Ethernet connection
Connected to an Ethernet port
Transmitting/Receiving data
3
WIRELESS
WIRELESS
WIRELESS
WIRELESS
Off
Steady green
Blinking green
Wireless interface disabled
Wireless Interface enabled
Transmitting/Receiving data
4
DSL
DSL
DSL
DSL
Blinking green
Steady green
Establishing or No DSL signal
DSL signal is established
5
INTERNET
INTERNET
INTERNET
INTERNET
Off
Steady green
Blinking green
Steady red
No connection to the Internet
Internet connection established
Transmitting/Receiving data
PPP authentication failed

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top