Page 21 / 26 Scroll up to view Page 16 - 20
CDMA 1xEV-DO Wireless Broadband Modem
AXW-D800 / AXW-D1900
- 21 -
Connecting the World Now
System
Host Name
Name of the EV-DO modem. You may change this
name according to your network need.
Change
Password
To change the password of your account, enter your
old password and new password.
System
Upgrade
To download new firmware.
Restore
Default
Restore all settings to factory default settings.
Reboot
System
Restart EV-DO modem.
Page 22 / 26
CDMA 1xEV-DO Wireless Broadband Modem
AXW-D800 / AXW-D1900
- 22 -
Connecting the World Now
Network
IP Address
IP address of EV-DO modem.
Subnet Mask
Subnet Mask
DHCP Server
Enable if using Dynamic IP Address.
DHCP Server
IP Range
Range of IPs that can be assigned by the DHCP
Server to each PC.
DNS
IP
Address
IP address of DNS Server provided by your Service
Provider.
PPP
Configuration
Enter User ID, Password, Authentication type, and
dial number of your wireless data network account.
APPLY
After making changes to Network settings, always
click APPLY button to saves changes.
Page 23 / 26
CDMA 1xEV-DO Wireless Broadband Modem
AXW-D800 / AXW-D1900
- 23 -
Connecting the World Now
Security
Firewall Support
Enable/Disable built-in firewall feature.
Client Filtering
Local Client PC group can not access specified
remote application.
Packet Forward
Enable specific ports to be opened for specific
applications.
MAC Filtering
Block specific MAC addresses.
DMZ Server
Open a virtual server to public.
Blocking WAN
Ping
Do not response to ping request with WAN IP
address.
APPLY
Click APPLY to apply any of the Security setting
changes.
Page 24 / 26
CDMA 1xEV-DO Wireless Broadband Modem
AXW-D800 / AXW-D1900
- 24 -
Connecting the World Now
Status
Local Area
Network
Current operation and connection status of LAN.
Wide Area
Network
Current operation and connection status of WAN.
Page 25 / 26
CDMA 1xEV-DO Wireless Broadband Modem
AXW-D800 / AXW-D1900
- 25 -
Connecting the World Now
Troubleshooting
General
z
Check for the appropriate power indication on the LED. If no power,
check the adaptor (or External Power Supply) connection between the
electrical outlet and the modem.
I can’t get good signal. My connection is unstable.
z
Check for the Signal LED.
If off, there is no service coverage.
(Out of
service area)
z
Two antennas should be firmly connected to the unit.
For some
reason, only one is to be used, always connect to the right side, which
is for receive and transmit.
The left antenna is only for receiving.
z
If Signal LED is showing red, it means current signal is weak. Try
placing EV-DO modem at different locations or Rotating EV-DO
modem to different direction. Avoid areas with high level of radio
interference.
I can’t connect to the Internet.
z
If using the Ethernet cable, check TCP/IP settings of your PC and
make sure your PC is obtaining IP address automatically from the EV-
DO Modem. Refer to “TCP/IP Settings” section of this manual.
z
If using the USB cable, check that you are using the correct Modem,
correct user name and password.
My PC is set to obtain IP address automatically as instructed in the
manual but I can’t access the Web.
z
Make sure the TCP/IP setting is also set to “obtain DNS server
address automatically”. Please refer to “TCP/IP Settings” section for
more information.
Q. How do I renew PC’s IP in Windows system?
1.
Click Start and Click Run.
2.
Type cmd in the prompt and click OK.
3.
In Command Prompt (C:\), type ipconfig/release and press Enter.
4.
In Command Prompt (C:\), type ipconfig/renew and press Enter.
5.
Exit the Command Prompt. Now your IP is renewed.

Rate

3.5 / 5 based on 2 votes.

Popular Axesstel Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top