AVM FRITZ-Box-Fon-WLAN-7570 Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

FRITZ-Box-Fon-WLAN-7570

Page 21 / 159 Scroll up to view Page 16 - 20

Using WLAN adapters from Other Manufacturers

FRITZ!Box Fon WLAN 7570 vDSL

Now insert the FRITZ!WLAN USB Stick N in the USB

port of the computer.

The security settings saved on the FRITZ!WLAN USB Stick N

are applied to the computer. Now the FRITZ!Box and

FRITZ!WLAN USB Stick N are connected with each other

wirelessly

Using WLAN adapters from Other Manufacturers

Installing

Proceed as follows to install a WLAN adapter from another

manufacturer:

Switch on your computer.

Install the WLAN adapter in your computer along with

the appropriate software. Please take note of the in-

structions in the documentation of the adapter.

In order to establish a WLAN connection to the

FRITZ!Box, you must either use the WLAN software supp-

lied with the operating system, or the manufacturer’s

WLAN software included in the WLAN adapter package.

Establishing a

Connection

The FRITZ!Box is delivered with preset values for WLAN se-

curity. You must enter these values during the configuration

of the WLAN adapter.

If you would like to establish a WLAN connection using

these preset values, then your WLAN adapter must support

WPA or WPA2 encryption.

Start the WLAN software.

Enter the following for the connection between the

FRITZ!Box and the WLAN adapter:

For more information, see the manual for the AVM

FRITZ!WLAN USB Stick N or the manual for the AVM

FRITZ!WLAN USB Stick.

Page 22 / 159

FRITZ!Box Fon WLAN 7570 vDSL

Using WLAN adapters from Other Manufacturers

Confirm your entries using the relevant button in the

user interface (for instance, “OK” or “Connect”).

Now your WLAN adapter and the FRITZ!Box are connected

with each other wirelessly.

Please see the instructions in the section “Opening the Us-

er Interface” on page 29. See also the information on WLAN

security in the section“Security” from page 122.

WPA Not

Supported

If your WLAN adapter does not support WPA, you must con-

vert the encryption in the FRITZ!Box to WEP. For this you

must change the WLAN settings in the FRITZ!Box. To do so,

proceed as follows:

Connect the FRITZ!Box and the computer using the

network cable (yellow) (see the section “Connecting

Computer(s) to the LAN Port” on page 18).

Start a web browser on the computer.

Enter

fritz.box

in the address line of the browser.

Select the “Advanced Settings / WLAN / Security”

menu in the “Settings” area.

Then select WEP encryption and enter a network key.

Click the “Apply” button.

A window is displayed with the WLAN security settings.

Print out the page by clicking the printer icon in the

toolbar.

SSID (name of the

WLAN radio network)

FRITZ!Box Fon WLAN 7570 vDSL

Encryption method

WPA (TKIP) or WPA2 (AESCCMP)

Encryption

WPA PSK

Key

The key is printed on the stickers on

the base of the device and on the

cover of the FRITZ!Box CD.

Network mode

Infrastructure

Page 23 / 159

Connecting to the DSL/VDSL Line

FRITZ!Box Fon WLAN 7570 vDSL

Close the user interface and clear the connection be-

tween the FRITZ!Box and the computer. Remove the

network cable (yellow).

Configure your WLAN adapter with the security set-

tings entered in the FRITZ!Box.

The WLAN connection between your WLAN adapter and the

FRITZ!Box will be established.

3.7

Connecting to the DSL/VDSL Line

Connecting to the DSL/VDSL splitter

Connecting

The gray cable is for connecting to the DSL/VDSL splitter.

This cable is a combination of a DSL and VDSL cable.

Page 24 / 159

FRITZ!Box Fon WLAN 7570 vDSL

Connecting to the ISDN Line

Connect the longer of the two gray branches of the ca-

ble to the port labeled “DSL/TEL”.

Then connect the other end of the cable to the corre-

sponding socket on the DSL/VDSL splitter. If the end

of the cable does not fit into the socket on the splitter,

insert the end of the cable into the gray RJ45/RJ11

adapter included in the package and then insert the

adapter into the socket on the DSL/VDSL splitter.

The green “Power” LED stops flashing after a short

time and remains lit to signalize that FRITZ!Box is

ready for Internet connections over DSL or VDSL.

3.8

Connecting to the ISDN Line

Your telephone line is either an analog line or an ISDN line.

If you have an ISDN line, read here how to connect the

FRITZ!Box with the ISDN line.

Connecting to the ISDN NT

Page 25 / 159

Connecting with the Analog Telephone Line

FRITZ!Box Fon WLAN 7570 vDSL

Connecting

Set aside the green cable delivered in the package.

Connect one branch of the cable to the socket on the

FRITZ!Box labeled “

”.

Insert the other branch of the cable into the socket of

your ISDN NT.

Now the FRITZ!Box and the ISDN line are connected.

3.9

Connecting with the Analog Telephone Line

Your telephone line is either an analog line or an ISDN line.

If you have an analog telephone line, read here about how

to connect the FRITZ!Box with the analog telephone line.

Connecting to the analog telephone line via the DSL/VDSL splitter

Connecting

Set aside the green cable delivered in the package.

Connect the longer gray branch of the cable to the

socket on the FRITZ!Box labeled “

”.

Rate

Popular AVM Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share