21

Accessing the Web Management Interface

1.

Run your Web browser application, such as Firefox or Microsoft Internet Explorer, from the computer con-

nected to the NVG599 device.

2.

Enter

in the Location text box.

While the NVG599 is determining the broadband network type, the following screen appears.

The Device Status page appears.

Administrator’s Handbook

22

3.

Check to make sure the Broadband and Service LEDs on your NVG599 device are lit

GREEN

to verify that the

connection to the Internet is active.

Congratulations! Your installation is complete. You can now surf to your favorite Web sites by typing a URL in

your browser’s location box or by selecting one of your favorite Internet bookmarks.

Broadband Network Redirect Pages

After a few minutes, if the broadband network cannot be determined, the following screen appears. Contact

AT&T Customer Care at the number shown on your screen for assistance.

If you click the

Continue

button, the following screen appears. Here you can manually select the broadband

network type, if you know it.

23

IP Diagnostics Page Redirect

In the event that your connection to the Internet fails, the

Broadband LED

on your NVG599 device flashes

RED

and you are redirected to the

IP Diagnostics

page.

Follow the on-screen troubleshooting suggestions.

For additional troubleshooting information, see

“Diagnostics” on page 77

and

“Basic Troubleshooting” on

page 87

.

When your connection is restored or the problem is resolved, the

Broadband LED

turns

GREEN

.

Offline Troubleshooting

If the WAN is down, the following information is displayed at the top of the page:

"

NOTE:

For AT&T this function is enabled by default. See the CLI command

“set management lan-redirect enable

[ off | on ]” on page 149

.

Administrator’s Handbook

24

Device Status Page

After you have performed the basic Easy Login configuration, any time you log in to your NVG599 you will

access the NVG599 Home page.

To access the Home page, type

in your Web browser’s location box.

Device Access Code

On the Device Status page, you may be required to provide your device access code to access the Web

management configuration pages. The device access code is unique to your device. It is printed on a label on

the side of the NVG599.

Enter your device access code and click the

Continue

button.

25

The Device Status page appears.

DeviceStatusWindow