21

c

. Windows Vista and Windows 7 obtain an IP address automatically by default. You may not need to configure it

at all.

To check, open the

Networking

Control Panel and select

Internet Protocol Version 4 (TCP/IPv4)

. Click the

Properties

button.

The

Internet Protocol Version 4 (TCP/IPv4) Properties

window should appear as shown.

If not, select the radio buttons shown above, and click the

OK

button.

Administrator’s Handbook

22

Macintosh MacOS 8 or higher or Mac OS X:

Step 1. Access the TCP/IP or Network control panel.

a

. MacOS follows a path like this:

Apple

Menu ->

Control Panels

->

TCP/IP

Control

Panel

b

. Mac OS X follows a path like this:

Apple

Menu ->

System Preferences

->

Network

Then go to Step 2.

Step 2. Select Built-in Ethernet

Step 3. Select Configure Using DHCP

Step 4. Close and Save, if prompted.

Proceed to

“

Accessing the W

eb Management Interface

” on page

23

.

23

Accessing the Web Management Interface

1.

Run your Web browser application, such as Firefox or Microsoft Internet Explorer,

from the computer connected to the Motorola

®

Gateway.

2.

Enter

http://192.168.1.254

in the Location text box.

While the Gateway is determining the Broadband network type, the following screen appears.

The Device Status Page appears.

Administrator’s Handbook

24

3.

Check to make sure the Broadband and Service LEDs are lit

GREEN

to verify that

the connection to the Internet is active.

Congratulations! Your installation is complete.

You can now surf to your favorite Web sites by typing an URL in your browser’s location box or by selecting one of

your favorite Internet bookmarks.

25

Broadband Network Redirect Pages

After a few minutes if the Broadband network cannot be determined, the following screen appears. Contact AT&T

Customer care at the number shown for assistance.

If you click the

Continue

button, the following screen appears. Here you can manually select the Broadband net-

work type, if you know it.